On 4.07.2023 18:31, David Wronek wrote:
> Add support for the RTC which is the same as on other PMICs and add the
> resin child node to the PM6150 PON device and disable it by default.
>
> Signed-off-by: David Wronek <davidwronek@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/pm6150.dtsi | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> index 2e6afa296141..9a7c532f7a12 100644
> --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
> @@ -53,6 +53,14 @@ pm6150_pwrkey: pwrkey {
> bias-pull-up;
> linux,code = <KEY_POWER>;
> };
> +
> + pm6150_resin: resin {
> + compatible = "qcom,pm8941-resin";
> + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
0x0 (GIC_SPI is a property of the ARM GIC, SPMI uses the interrupts
field in a rather hacky and specific way)
[...]
> + rtc@6000 {
> + compatible = "qcom,pm8941-rtc";
> + reg = <0x6000>, <0x6100>;
> + reg-names = "rtc", "alarm";
> + interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
IRQ_TYPE_EDGE_RISING
Konrad
> + };
> +
> pm6150_gpios: gpio@c000 {
> compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
> reg = <0xc000>;
