Re: [PATCH 5/8] drm/msm/dpu: drop the dpu_core_perf_crtc_update()'s stop_req param

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 4 Jul 2023 at 02:16, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
>
>
>
> On 7/3/2023 4:01 PM, Dmitry Baryshkov wrote:
> > On Tue, 4 Jul 2023 at 01:55, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
> >>
> >>
> >>
> >> On 7/3/2023 3:53 PM, Dmitry Baryshkov wrote:
> >>> On Tue, 4 Jul 2023 at 01:37, Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx> wrote:
> >>>>
> >>>>
> >>>>
> >>>> On 6/19/2023 5:08 PM, Dmitry Baryshkov wrote:
> >>>>> The stop_req is true only in the dpu_crtc_disable() case, when
> >>>>> crtc->enable has already been set to false. This renders the stop_req
> >>>>> argument useless. Remove it completely.
> >>>>>
> >>>>
> >>>> What about the enable case?
> >>>>
> >>>> That time dpu_crtc->enabled  will be false but you need valid clock and
> >>>> BW that time when you want to enable.
> >>>
> >>> Maybe I'm missing something here. The driver sets dpu_crtc->enabled in
> >>> atomic_enable, while dpu_core_perf_crtc_update() is called further,
> >>> during atomic_flush, or from the CRTC event handler. And both these
> >>> cases have stop_req as false.
> >>>
> >>
> >> But the first enable will happen with a commit too right?
> >
> > Which one? Could you please point to it?
> >
>
> My question was that
>
> drm_atomic_helper_commit_planes which calls
> drm_crtc_helper_funcs::atomic_flush (which calls
> dpu_core_perf_crtc_update) is called before
> drm_crtc_helper_funcs::atomic_enable which gets called only during
> drm_atomic_helper_commit_modeset_enables in msm_atomic_commit_tail
>
> Wouldnt that get broken now?

No, crtc->enabled is false, as you pointed out, so (crtc->enabled &&
!stop_req) will be false too.

>
>
> >>
> >> Thats the one I am referring to.
> >>
> >>>>
> >>>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> >>>>> ---
> >>>>>     drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 12 ++++++------
> >>>>>     drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h |  3 +--
> >>>>>     drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c      |  6 +++---
> >>>>>     3 files changed, 10 insertions(+), 11 deletions(-)
> >>>>>
> >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> >>>>> index f8d5c87d0915..773e641eab28 100644
> >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
> >>>>> @@ -277,7 +277,7 @@ static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
> >>>>>     }
> >>>>>
> >>>>>     int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> >>>>> -             int params_changed, bool stop_req)
> >>>>> +                           int params_changed)
> >>>>>     {
> >>>>>         struct dpu_core_perf_params *new, *old;
> >>>>>         bool update_bus = false, update_clk = false;
> >>>>> @@ -301,13 +301,13 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> >>>>>         dpu_crtc = to_dpu_crtc(crtc);
> >>>>>         dpu_cstate = to_dpu_crtc_state(crtc->state);
> >>>>>
> >>>>> -     DRM_DEBUG_ATOMIC("crtc:%d stop_req:%d core_clk:%llu\n",
> >>>>> -                     crtc->base.id, stop_req, kms->perf.core_clk_rate);
> >>>>> +     DRM_DEBUG_ATOMIC("crtc:%d enabled:%d core_clk:%llu\n",
> >>>>> +                     crtc->base.id, crtc->enabled, kms->perf.core_clk_rate);
> >>>>>
> >>>>>         old = &dpu_crtc->cur_perf;
> >>>>>         new = &dpu_cstate->new_perf;
> >>>>>
> >>>>> -     if (crtc->enabled && !stop_req) {
> >>>>> +     if (crtc->enabled) {
> >>>>>                 /*
> >>>>>                  * cases for bus bandwidth update.
> >>>>>                  * 1. new bandwidth vote - "ab or ib vote" is higher
> >>>>> @@ -337,7 +337,7 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> >>>>>         }
> >>>>>
> >>>>>         trace_dpu_perf_crtc_update(crtc->base.id, new->bw_ctl,
> >>>>> -             new->core_clk_rate, stop_req, update_bus, update_clk);
> >>>>> +             new->core_clk_rate, !crtc->enabled, update_bus, update_clk);
> >>>>>
> >>>>>         if (update_bus) {
> >>>>>                 ret = _dpu_core_perf_crtc_update_bus(kms, crtc);
> >>>>> @@ -355,7 +355,7 @@ int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> >>>>>         if (update_clk) {
> >>>>>                 clk_rate = _dpu_core_perf_get_core_clk_rate(kms);
> >>>>>
> >>>>> -             trace_dpu_core_perf_update_clk(kms->dev, stop_req, clk_rate);
> >>>>> +             trace_dpu_core_perf_update_clk(kms->dev, !crtc->enabled, clk_rate);
> >>>>>
> >>>>>                 clk_rate = min(clk_rate, kms->perf.max_core_clk_rate);
> >>>>>                 ret = dev_pm_opp_set_rate(&kms->pdev->dev, clk_rate);
> >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> >>>>> index 2bf7836f79bb..c29ec72984b8 100644
> >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.h
> >>>>> @@ -58,11 +58,10 @@ int dpu_core_perf_crtc_check(struct drm_crtc *crtc,
> >>>>>      * dpu_core_perf_crtc_update - update performance of the given crtc
> >>>>>      * @crtc: Pointer to crtc
> >>>>>      * @params_changed: true if crtc parameters are modified
> >>>>> - * @stop_req: true if this is a stop request
> >>>>>      * return: zero if success, or error code otherwise
> >>>>>      */
> >>>>>     int dpu_core_perf_crtc_update(struct drm_crtc *crtc,
> >>>>> -             int params_changed, bool stop_req);
> >>>>> +                           int params_changed);
> >>>>>
> >>>>>     /**
> >>>>>      * dpu_core_perf_crtc_release_bw - release bandwidth of the given crtc
> >>>>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >>>>> index ff5d306b95ed..214229d11e3e 100644
> >>>>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >>>>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
> >>>>> @@ -718,7 +718,7 @@ static void dpu_crtc_frame_event_cb(void *data, u32 event)
> >>>>>     void dpu_crtc_complete_commit(struct drm_crtc *crtc)
> >>>>>     {
> >>>>>         trace_dpu_crtc_complete_commit(DRMID(crtc));
> >>>>> -     dpu_core_perf_crtc_update(crtc, 0, false);
> >>>>> +     dpu_core_perf_crtc_update(crtc, 0);
> >>>>>         _dpu_crtc_complete_flip(crtc);
> >>>>>     }
> >>>>>
> >>>>> @@ -884,7 +884,7 @@ static void dpu_crtc_atomic_flush(struct drm_crtc *crtc,
> >>>>>                 return;
> >>>>>
> >>>>>         /* update performance setting before crtc kickoff */
> >>>>> -     dpu_core_perf_crtc_update(crtc, 1, false);
> >>>>> +     dpu_core_perf_crtc_update(crtc, 1);
> >>>>>
> >>>>>         /*
> >>>>>          * Final plane updates: Give each plane a chance to complete all
> >>>>> @@ -1100,7 +1100,7 @@ static void dpu_crtc_disable(struct drm_crtc *crtc,
> >>>>>                 atomic_set(&dpu_crtc->frame_pending, 0);
> >>>>>         }
> >>>>>
> >>>>> -     dpu_core_perf_crtc_update(crtc, 0, true);
> >>>>> +     dpu_core_perf_crtc_update(crtc, 0);
> >>>>>
> >>>>>         drm_for_each_encoder_mask(encoder, crtc->dev, crtc->state->encoder_mask)
> >>>>>                 dpu_encoder_register_frame_event_callback(encoder, NULL, NULL);
> >>>
> >>>
> >>>
> >
> >
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux