Move pm8058 device nodes to follow the alphanumberic sorting order.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/pm8058.dtsi | 90 +++++++++++++++---------------
1 file changed, 45 insertions(+), 45 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi
index ad581c3bcbd2..913a511719fa 100644
--- a/arch/arm/boot/dts/qcom/pm8058.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8058.dtsi
@@ -8,15 +8,24 @@ pm8058: pmic {
#address-cells = <1>;
#size-cells = <0>;
- pm8058_gpio: gpio@150 {
- compatible = "qcom,pm8058-gpio",
- "qcom,ssbi-gpio";
- reg = <0x150>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- gpio-ranges = <&pm8058_gpio 0 0 44>;
- #gpio-cells = <2>;
+ pwrkey@1c {
+ compatible = "qcom,pm8058-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8058>;
+ interrupts = <50 1>, <51 1>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8058_led48: led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ status = "disabled";
+ };
+
+ vibrator@4a {
+ compatible = "qcom,pm8058-vib";
+ reg = <0x4a>;
};
pm8058_mpps: mpps@50 {
@@ -30,13 +39,22 @@ pm8058_mpps: mpps@50 {
#interrupt-cells = <2>;
};
- pwrkey@1c {
- compatible = "qcom,pm8058-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8058>;
- interrupts = <50 1>, <51 1>;
- debounce = <15625>;
- pull-up;
+ pm8058_led131: led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ status = "disabled";
+ };
+
+ pm8058_led132: led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ status = "disabled";
+ };
+
+ pm8058_led133: led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ status = "disabled";
};
pm8058_keypad: keypad@148 {
@@ -49,6 +67,17 @@ pm8058_keypad: keypad@148 {
row-hold = <91500>;
};
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8058_gpio 0 0 44>;
+ #gpio-cells = <2>;
+ };
+
pm8058_xoadc: xoadc@197 {
compatible = "qcom,pm8058-adc";
reg = <0x197>;
@@ -109,35 +138,6 @@ rtc@1e8 {
interrupts = <39 1>;
allow-set-time;
};
-
- vibrator@4a {
- compatible = "qcom,pm8058-vib";
- reg = <0x4a>;
- };
-
- pm8058_led48: led@48 {
- compatible = "qcom,pm8058-keypad-led";
- reg = <0x48>;
- status = "disabled";
- };
-
- pm8058_led131: led@131 {
- compatible = "qcom,pm8058-led";
- reg = <0x131>;
- status = "disabled";
- };
-
- pm8058_led132: led@132 {
- compatible = "qcom,pm8058-led";
- reg = <0x132>;
- status = "disabled";
- };
-
- pm8058_led133: led@133 {
- compatible = "qcom,pm8058-led";
- reg = <0x133>;
- status = "disabled";
- };
};
};
--
2.39.2
