[PATCH 1/2] drm/panel: Add Sharp LS043T1LE01 panel binding documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Werner Johansson <werner.johansson@xxxxxxxxxxxxxx>

Signed-off-by: Werner Johansson <werner.johansson@xxxxxxxxxxxxxx>
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
---
 .../bindings/panel/sharp,ls043t1le01.txt           | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/sharp,ls043t1le01.txt

diff --git a/Documentation/devicetree/bindings/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/panel/sharp,ls043t1le01.txt
new file mode 100644
index 000000000000..758d48d33e46
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/sharp,ls043t1le01.txt
@@ -0,0 +1,22 @@
+Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,ls043t1le01-qhd-vid"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- reset-gpios: a GPIO spec for the reset pin
+
+Example:
+
+	mdss_dsi0: qcom,mdss_dsi@fd922800 {
+		panel: panel@0 {
+			compatible = "sharp,ls043t1le01-qhd-vid";
+			reg = <0>;
+			avdd-supply = <&pm8941_l22>;
+			backlight = <&pm8941_wled>;
+			reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
-- 
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux