Re: [PATCH 1/4] pcie: qcom: Fix the macro PARF_SLV_ADDR_SPACE_SIZE_2_3_3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

On 6/23/2023 11:30 PM, Bjorn Helgaas wrote:
On Fri, Jun 23, 2023 at 03:04:42PM +0530, Sricharan Ramabadhran wrote:
PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
pcie slave addr size was initially set to 0x358, but
was wrongly changed to 0x168 as a part of
'PCI: qcom: Sort and group registers and bitfield definitions'
Fixing it back to right value here.

1) Make your subject line match the history.  For example, you're
fixing 769e49d87b15 ("PCI: qcom: Sort and group registers ..."), so
your subject line should start with "PCI: qcom: ...".


 ok, will fix.

2) It doesn't look like 769e49d87b15 changed
PARF_SLV_ADDR_SPACE_SIZE_2_3_3:

   $ git show 769e49d87b15 | grep PARF_SLV_ADDR_SPACE_SIZE_2_3_3
   +#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP ver 2.3.3 */
   -#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3		0x16C /* Register offset specific to IP rev 2.3.3 */

What am I missing here?  Do you have another out-of-tree patch that
broke this?

 39171b33f652 ("PCI: qcom: Remove PCIE20_ prefix from
               register definitions") broke it. Will change and post .

Regards,
 Sricharan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux