On Thu, 29 Jun 2023 12:58:47 +0300, Dmitry Baryshkov wrote: > The GPI DMA mode requires for TX DMA to be prepared. Force SPI core to > provide TX buffer even if the caller didn't provide one by setting the > SPI_CONTROLLER_MUST_TX flag. > > Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 > Mem abort info: > ESR = 0x0000000096000004 > EC = 0x25: DABT (current EL), IL = 32 bits > SET = 0, FnV = 0 > EA = 0, S1PTW = 0 > FSC = 0x04: level 0 translation fault > Data abort info: > ISV = 0, ISS = 0x00000004 > CM = 0, WnR = 0 > user pgtable: 4k pages, 48-bit VAs, pgdp=0000000815b82000 > [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 > Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP > Modules linked in: > pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) > pc : gpi_prep_slave_sg+0x3a4/0x5a8 > lr : gpi_prep_slave_sg+0xcc/0x5a8 > sp : ffff80000a2c3930 > x29: ffff80000a2c3930 x28: ffff80000a2c3c58 x27: ffff4e744d8307f0 > x26: 0000000000000001 x25: ffff4e7440f55810 x24: 0000000000000000 > x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000003 > x20: ffff4e7440c1f800 x19: ffff4e744d1f8618 x18: ffffd8ac41787e68 > x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000100 > x14: ffff4e744d608000 x13: 0000000800000002 x12: 0000000600000004 > x11: 0000000000000000 x10: fffffffffff9f980 x9 : 0000000000000000 > x8 : ffff4e7440c1fa00 x7 : 0000000000000000 x6 : 000000000000003f > x5 : 00000000ffffffff x4 : 0000000000000900 x3 : 0000000000000200 > x2 : 0000000100000000 x1 : ffff4e7451f73400 x0 : ffff4e744d1f8610 > Call trace: > gpi_prep_slave_sg+0x3a4/0x5a8 > spi_geni_transfer_one+0x190/0x558 > spi_transfer_one_message+0x424/0x800 > __spi_pump_transfer_message+0x248/0x670 > __spi_sync+0x2cc/0x3a8 > spi_sync+0x3c/0x68 > spidev_sync_read+0xb0/0x108 > spidev_read+0x54/0x110 > vfs_read+0xc8/0x270 > ksys_read+0xec/0x110 > __arm64_sys_read+0x24/0x38 > invoke_syscall+0x50/0x128 > el0_svc_common.constprop.0+0xd4/0x100 > do_el0_svc+0x40/0xa8 > el0_svc+0x34/0x108 > el0t_64_sync_handler+0xf4/0x120 > el0t_64_sync+0x190/0x198 > Code: 94079d2b 17ffff94 a90573fb f940a660 (f9400b06) > ---[ end trace 0000000000000000 ]--- > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: spi-geni-qcom: enable SPI_CONTROLLER_MUST_TX for GPI DMA mode commit: d10005837be83906bbd2078c3b4f9dfcbd6c95b6 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
