Am 28.07.2015 um 14:54 schrieb Srinivas Kandagatla: > This patch adds LVDS panel for IFC6410. > > Signed-off-by: Rob Clark <robdclark@xxxxxxxxx> > [Rob Clark: WIP patch] > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 66 ++++++++++++++++++++++++++++++ > 1 file changed, 66 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts > index 1ab71f1..3bdac02 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts > @@ -63,6 +63,12 @@ > qcom,switch-mode-frequency = <3200000>; > }; > > + pm8921_l2: l2 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + bias-pull-down; > + }; > + > pm8921_l3: l3 { > regulator-min-microvolt = <3050000>; > regulator-max-microvolt = <3300000>; > @@ -96,6 +102,10 @@ > pm8921_lvs1: lvs1 { > bias-pull-down; > }; > + > + pm8921_lvs7: lvs7 { > + bias-pull-down; > + }; > }; > }; > > @@ -119,6 +129,41 @@ > > mdp: qcom,mdp@5100000 { > status = "okay"; > + qcom,lvds-panel = <&panel>; In my testing this broke/uglified HDMI output. Since not everyone has that LVDS panel attached, or might have a different panel type, I don't think the panel node belongs in the generic -ifc6410.dts file. I suggest you add an -ifc6410+inforce-lvds.dts or so for that. > + lvds-vccs-3p3v-supply = <&ext_3p3v>; > + lvds-pll-vdda-supply = <&pm8921_l2>; > + lvds-vdda-supply = <&pm8921_lvs7>; > + }; > + > + panel_3p3v: panel_3p3v { s/_/-/ ? > + compatible = "regulator-fixed"; > + pinctrl-0 = <&disp_en_gpios>; > + pinctrl-names = "default"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "panel_en_3p3v"; > + regulator-type = "voltage"; > + startup-delay-us = <0>; > + gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + regulator-boot-on; > + }; > + > + backlight: backlight{ > + pinctrl-0 = <&pwm_bl_gpios>; > + pinctrl-names = "default"; > + compatible = "gpio-backlight"; > + gpios = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; > + default-on; > + }; > + > + panel: auo,b101xtn01 { panel: panel { ? Regards, Andreas > + status = "okay"; > + compatible = "auo,b101xtn01"; > + > + ddc-i2c-bus = <&i2c3>; > + backlight = <&backlight>; > + power-supply = <&panel_3p3v>; > }; > > gsbi3: gsbi@16200000 { > @@ -235,6 +280,27 @@ > pm8921_gpio: gpio@150 { > pinctrl-names = "default"; > pinctrl-0 = <&wlan_default_gpios>; > + > + pwm_bl_gpios: pwm-bl-gpios { > + pios { > + pins = "gpio26"; > + bias-disable; > + function = "normal"; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; > + power-source = <PM8921_GPIO_S4>; > + }; > + }; > + > + disp_en_gpios: disp-en-gpios { > + pios { > + pins = "gpio36"; > + bias-disable; > + function = "normal"; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; > + power-source = <PM8921_GPIO_S4>; > + }; > + }; > + > wlan_default_gpios: wlan-gpios { > pios { > pins = "gpio43"; > -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Dilip Upmanyu, Graham Norton; HRB 21284 (AG Nürnberg) -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html