[PATCH v2 13/15] arm64: dts: qcom: sm6125: Add dispcc node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Enable and configure the dispcc node on SM6125 for consumption by MDSS
later on.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index edb03508dba3..a5cc0d43d2d9 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Martin Botka <martin.botka@xxxxxxxxxxxxxx>
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sm6125.h>
 #include <dt-bindings/clock/qcom,gcc-sm6125.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -1203,6 +1204,30 @@ sram@4690000 {
 			reg = <0x04690000 0x10000>;
 		};
 
+		dispcc: clock-controller@5f00000 {
+			compatible = "qcom,sm6125-dispcc";
+			reg = <0x05f00000 0x20000>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <&gcc GCC_DISP_AHB_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk",
+				      "cfg_ahb_clk",
+				      "gcc_disp_gpll0_div_clk_src";
+			power-domains = <&rpmpd SM6125_VDDCX>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0x0c600000 0x80000>;

-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux