On 27.06.2023 03:24, Dmitry Baryshkov wrote:
> The controlling GPIO for the regulator (even if it is unified by design)
> is not a property of SoC, so move it to board files.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
You missed the dragonboard and klte
Konrad
> arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts | 4 ++++
> arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi | 4 ++++
> arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 1 -
> arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts | 4 ++++
> arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts | 4 ++++
> .../dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 4 ++++
> 6 files changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
> index da99f770d4f5..eccd8f536bce 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -694,3 +694,7 @@ &usb_hs1_phy {
>
> qcom,init-seq = /bits/ 8 <0x1 0x64>;
> };
> +
> +&vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
> index 23ae474698aa..c8f914c4ebc4 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi
> @@ -493,3 +493,7 @@ &usb_hs1_phy {
> extcon = <&smbb>;
> qcom,init-seq = /bits/ 8 <0x1 0x64>;
> };
> +
> +&vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> index aeca504918a0..a8f1c5d76bcd 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi
> @@ -2387,7 +2387,6 @@ vreg_boost: vreg-boost {
> regulator-always-on;
> regulator-boot-on;
>
> - gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> enable-active-high;
>
> pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
> index 24f9521a0be6..ba94186792d5 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts
> @@ -461,3 +461,7 @@ &usb_hs1_phy {
> extcon = <&smbb>;
> qcom,init-seq = /bits/ 8 <0x1 0x64>;
> };
> +
> +&vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
> index c0ca264d8140..b95fd5f2a481 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts
> @@ -510,3 +510,7 @@ &usb_hs1_phy {
> extcon = <&smbb>;
> qcom,init-seq = /bits/ 8 <0x1 0x64>;
> };
> +
> +&vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> index efe21289c9fe..09514324d444 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
> @@ -672,3 +672,7 @@ &usb_hs1_phy {
> extcon = <&smbb>;
> qcom,init-seq = /bits/ 8 <0x1 0x64>;
> };
> +
> +&vreg_boost {
> + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
> +};
