On 27.06.2023 12:40, Abel Vesa wrote:
> Implement the GDSC specific genpd set_hwmode_dev callback in order to
> switch the HW control on or off. For any GDSC that supports HW control
> set this callback in order to allow its consumers to control it.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
Currently all GDSCs with flags & HW_CTRL enable hw ctrl mode implicilty.
I didn't get any cover letter with these patches.. are you planning on
retiring that behavior? Presumably after adding a matching pair of set_hwmode
in venus!
fwiw this patch lgtm
Konrad
> drivers/clk/qcom/gdsc.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c
> index 5358e28122ab..9a04bf2e4379 100644
> --- a/drivers/clk/qcom/gdsc.c
> +++ b/drivers/clk/qcom/gdsc.c
> @@ -314,6 +314,26 @@ static int gdsc_enable(struct generic_pm_domain *domain)
> return 0;
> }
>
> +static int gdsc_set_hwmode_dev(struct generic_pm_domain *domain,
> + struct device *dev, bool enable)
> +{
> + int ret = gdsc_hwctrl(domain_to_gdsc(domain), enable);
> +
> + if (ret)
> + goto out;
> +
> + /*
> + * Wait for the GDSC to go through a power down and
> + * up cycle. In case there is a status polling going on
> + * before the power cycle is completed it might read an
> + * wrong status value.
> + */
> + udelay(1);
> +
> +out:
> + return ret;
> +}
> +
> static int gdsc_disable(struct generic_pm_domain *domain)
> {
> struct gdsc *sc = domain_to_gdsc(domain);
> @@ -451,6 +471,8 @@ static int gdsc_init(struct gdsc *sc)
> sc->pd.power_off = gdsc_disable;
> if (!sc->pd.power_on)
> sc->pd.power_on = gdsc_enable;
> + if (sc->flags & HW_CTRL)
> + sc->pd.set_hwmode_dev = gdsc_set_hwmode_dev;
>
> ret = pm_genpd_init(&sc->pd, NULL, !on);
> if (ret)
