[PATCH v5 5/5] arm64: dts: qcom: sm8450: Use standalone ICE node for UFS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With the ICE driver now merged let's convert the ufs node to use the new
style.

Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 5cd7296c7660..79627117a776 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -4120,9 +4120,7 @@ system-cache-controller@19200000 {
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x3000>,
-			      <0 0x01d88000 0 0x8000>;
-			reg-names = "std", "ice";
+			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy_lanes>;
 			phy-names = "ufsphy";
@@ -4147,8 +4145,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk",
-				"ice_core_clk";
+				"rx_lane1_sync_clk";
 			clocks =
 				<&gcc GCC_UFS_PHY_AXI_CLK>,
 				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -4157,8 +4154,7 @@ ufs_mem_hc: ufshc@1d84000 {
 				<&rpmhcc RPMH_CXO_CLK>,
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
-				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
 			freq-table-hz =
 				<75000000 300000000>,
 				<0 0>,
@@ -4167,8 +4163,9 @@ ufs_mem_hc: ufshc@1d84000 {
 				<75000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<0 0>,
-				<75000000 300000000>;
+				<0 0>;
+			qcom,ice = <&ice>;
+
 			status = "disabled";
 		};
 
@@ -4198,6 +4195,13 @@ ufs_mem_phy_lanes: phy@1d87400 {
 			};
 		};
 
+		ice: crypto@1d88000 {
+			compatible = "qcom,sm8450-inline-crypto-engine",
+				     "qcom,inline-crypto-engine";
+			reg = <0 0x01d88000 0 0x8000>;
+			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+		};
+
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0 0x01dc4000 0 0x28000>;

-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux