Re: [RESEND v6 6/8] arm64: dts: qcom: sc7280: Modify VA/RX/TX macro clock nodes for audioreach solution

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 26.06.2023 13:13, Mohammad Rafi Shaik wrote:
> 
> On 6/16/2023 4:59 PM, Konrad Dybcio wrote:
>> On 16.06.2023 12:35, Mohammad Rafi Shaik wrote:
>>> From: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
>>>
>>> Modify VA, RX and TX macro and lpass_tlmm clock properties and
>>> enable them. For audioreach solution mclk, npl and fsgen clocks
>>> are enabled through the q6prm clock driver.
>>>
>>> Delete the power domain properties from VA, RX and TX macro,
>>> for audioreach solution the macro, dcodec power domains enabled
>>> through the q6prm clock driver.
>>>
>>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
>>> Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
>>> ---
>> Maybe sc7280-audioreach.dtsi containing all these changes that could be
>> reused by others would be in order?
> Thanks for comment,
> 
> yes, will create a common sc7280-audioreach.dtsi file, which will contain common audioreach changes
> and could be reused by others.
>>>   .../sc7280-herobrine-audioreach-wcd9385.dtsi  | 43 +++++++++++++++++++
>>>   1 file changed, 43 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>> index 9daea1b25656..c02ca393378f 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
>>> @@ -196,3 +196,46 @@ q6prmcc: clock-controller {
>>>           };
>>>       };
>>>   };
>>> +
>>> +&lpass_rx_macro {
>>> +    /delete-property/ power-domains;
>>> +    /delete-property/ power-domain-names;
>> Surely they shouldn't cause issues, even if the vote would be
>> superfluous? They are still powered by these power domains, I'd assume?
> No, In Audioreach case this macro and decodec clocks are not power by power domains,
> this macro and decodec hw clocks are enrolled by q6prmcc clock voting.
So the same piece of hardware is modeled differently twice?

i.e. the same GDSCs are reached once with register accesses and once
registered as "Q6 vote clocks"?

that sounds like a bit of an overstep to register them with genpd and CCF
depending on what entity controls them.. perhaps the "q6 vote clocks" could
be remodeled as power domains as that's what they're ultimately seem to
be referencing.. Krzysztof should have an opinion.

Konrad
>>> +    clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&lpass_va_macro>;
>>> +    clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
>> The drivers use clk_get with name-based lookup.. you should be able to
>> simply extend the list in the common DTSI. Please test that on both
>> audioreach and the other thing though.
>>
>> Konrad
> The clock names are not a extensions, same set of clocks are used in non ADSP solutions.
> In Audioreach solution these clocks enabling by q6prmcc clock voting.
> 
> Rafi.
>>> +
>>> +    status = "okay";
>>> +};
>>> +
>>> +&lpass_tlmm {
>>> +    clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
>>> +    clock-names = "core", "audio";
>>> +};
>>> +
>>> +&lpass_tx_macro {
>>> +    /delete-property/ power-domains;
>>> +    /delete-property/ power-domain-names;
>>> +    clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&lpass_va_macro>;
>>> +    clock-names = "mclk", "npl", "macro", "dcodec", "fsgen";
>>> +
>>> +    status = "okay";
>>> +};
>>> +
>>> +&lpass_va_macro {
>>> +    /delete-property/ power-domains;
>>> +    /delete-property/ power-domain-names;
>>> +    clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
>>> +         <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
>>> +    clock-names = "mclk", "macro", "dcodec";
>>> +
>>> +    status = "okay";
>>> +};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux