Re: [RFT PATCH] arm64: dts: qcom: sdm850-c630: add missing panel supply

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24.06.2023 16:56, Caleb Connolly wrote:
> 
> 
> On 17/06/2023 17:15, Krzysztof Kozlowski wrote:
>> Panel bindings (boe,nv133fhm-n61) require supply which here actually can
>> be turned on/off via GPIO control:
>>
>>   sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> 
> I've been running an equivalent patch for a while, so
> 
> Tested-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
> 
> The dsi bridge vcc and vcca supplies are also missing, they're powered
> from vreg_l2a_1p2 and controlled by pm8998_gpio 9.
Mind submitting an incremental patch?

Konrad
>>
>> ---
>>
>> Not tested on hardware
>> ---
>>  .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 20 +++++++++++++++++++
>>  1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
>> index cfbc4fc1eba9..3d871567cf81 100644
>> --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
>> +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
>> @@ -87,6 +87,25 @@ sn65dsi86_refclk: sn65dsi86-refclk {
>>  		clock-frequency = <19200000>;
>>  	};
>>  
>> +	vph_pwr: regulator-vph-pwr {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vph_pwr";
>> +		regulator-min-microvolt = <3700000>;
>> +		regulator-max-microvolt = <3700000>;
>> +	};
>> +
>> +	vlcm_3v3: regulator-vlcm-3v3 {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "vlcm_3v3";
>> +
>> +		vin-supply = <&vph_pwr>;
>> +		regulator-min-microvolt = <3300000>;
>> +		regulator-max-microvolt = <3300000>;
>> +
>> +		gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
>> +		enable-active-high;
>> +	};
>> +
>>  	backlight: backlight {
>>  		compatible = "pwm-backlight";
>>  		pwms = <&sn65dsi86 1000000>;
>> @@ -419,6 +438,7 @@ aux-bus {
>>  			panel: panel {
>>  				compatible = "boe,nv133fhm-n61";
>>  				backlight = <&backlight>;
>> +				power-supply = <&vlcm_3v3>;
>>  
>>  				port {
>>  					panel_in_edp: endpoint {
> 



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux