[PATCH v2 26/26] ARM: dts: qcom: ipq8064: drop 'regulator' property from SAW2 devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SAW2 device should describe the regulator constraints rather than
just declaring that it has the regulator.

Drop the 'regulator' property. If/when CPU voltage scaling is
implemented for this platform, proper regulator nodes show be added
instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 6198f42f6a9c..ecb99e104de0 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -589,7 +589,6 @@ acc0: clock-controller@2088000 {
 		saw0: regulator@2089000 {
 			compatible = "qcom,saw2";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
 		};
 
 		acc1: clock-controller@2098000 {
@@ -604,7 +603,6 @@ acc1: clock-controller@2098000 {
 		saw1: regulator@2099000 {
 			compatible = "qcom,saw2";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
 		};
 
 		nss_common: syscon@3000000 {
-- 
2.39.2




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux