Re: [PATCH v2 05/11] mfd: devicetree: bindings: Add Qualcomm SMD based RPM DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 27, 2015 at 08:29:18AM +0100, Lee Jones wrote:
> On Fri, 24 Jul 2015, Mark Brown wrote:
> > On Fri, Jul 24, 2015 at 11:24:34AM +0100, Mark Brown wrote:

> From here:

> > > > > > +                pm8941-regulators {
> > > > > > +                        compatible = "qcom,rpm-pm8941-regulators";
> > > > > > +                        vdd_l13_l20_l23_l24-supply = <&pm8941_boost>;

> > > > > I'd like Mark to glance at this.

> Mark: Is this new property okay?

As far as I can see that looks like a standard supply property, assuming
the supply is actually called that why would it be an issue?

> > The specified range of the regulator is 1.75-1.85V and this is handled
> > by the implementation, however the board designers have stated that it
> > is only allowed to be configured to 1.8V.

> > So DT is used to narrow the capabilities of the individual component to
> > something that's suitable for this particular system.

> > > We still need Mark to look at this.

> Is it okay for the regulator-{min,max}-microvolt to be artificially
> restricted to the required value, despite knowing that the regulator
> is capable of supply {more,less} voltage?

Yes, that's the entire purpose of those properties - to set the limits
the board designers have which will typically be more restrictive than
those that the regulator itself is capable of imposing.

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux