[PATCH v2 1/4] interconnect: qcom: Add support for mask-based BCMs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Mike Tipton <mdtipton@xxxxxxxxxxxxxx>

Some BCMs aren't directly associated with the data path (i.e. ACV) and
therefore don't communicate using BW. Instead, they are simply
enabled/disabled with a simple bit mask. Add support for these.

Origin commit retrieved from:
https://git.codelinaro.org/clo/la/kernel/msm-5.15/-/commit/2d1573e0206998151b342e6b52a4c0f7234d7e36

Signed-off-by: Mike Tipton <mdtipton@xxxxxxxxxxxxxx>
[narmstrong: removed copyright change from original commit]
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 drivers/interconnect/qcom/bcm-voter.c | 5 +++++
 drivers/interconnect/qcom/icc-rpmh.h  | 2 ++
 2 files changed, 7 insertions(+)

diff --git a/drivers/interconnect/qcom/bcm-voter.c b/drivers/interconnect/qcom/bcm-voter.c
index 8f385f9c2dd3..d5f2a6b5376b 100644
--- a/drivers/interconnect/qcom/bcm-voter.c
+++ b/drivers/interconnect/qcom/bcm-voter.c
@@ -83,6 +83,11 @@ static void bcm_aggregate(struct qcom_icc_bcm *bcm)
 
 		temp = agg_peak[bucket] * bcm->vote_scale;
 		bcm->vote_y[bucket] = bcm_div(temp, bcm->aux_data.unit);
+
+		if (bcm->enable_mask && (bcm->vote_x[bucket] || bcm->vote_y[bucket])) {
+			bcm->vote_x[bucket] = 0;
+			bcm->vote_y[bucket] = bcm->enable_mask;
+		}
 	}
 
 	if (bcm->keepalive && bcm->vote_x[QCOM_ICC_BUCKET_AMC] == 0 &&
diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
index 04391c1ba465..7843d8864d6b 100644
--- a/drivers/interconnect/qcom/icc-rpmh.h
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -81,6 +81,7 @@ struct qcom_icc_node {
  * @vote_x: aggregated threshold values, represents sum_bw when @type is bw bcm
  * @vote_y: aggregated threshold values, represents peak_bw when @type is bw bcm
  * @vote_scale: scaling factor for vote_x and vote_y
+ * @enable_mask: optional mask to send as vote instead of vote_x/vote_y
  * @dirty: flag used to indicate whether the bcm needs to be committed
  * @keepalive: flag used to indicate whether a keepalive is required
  * @aux_data: auxiliary data used when calculating threshold values and
@@ -97,6 +98,7 @@ struct qcom_icc_bcm {
 	u64 vote_x[QCOM_ICC_NUM_BUCKETS];
 	u64 vote_y[QCOM_ICC_NUM_BUCKETS];
 	u64 vote_scale;
+	u32 enable_mask;
 	bool dirty;
 	bool keepalive;
 	struct bcm_db aux_data;

-- 
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux