PARF_SLV_ADDR_SPACE_SIZE_2_3_3 macro used for IPQ8074
pcie slave addr size was initially set to 0x358, but
was wrongly changed to 0x168 as a part of
'PCI: qcom: Sort and group registers and bitfield definitions'
Fixing it back to right value here.
Without this pcie bring up on IPQ8074 is broken now.
Fixes: 769e49d87b15 ("PCI: qcom: Sort and group registers and bitfield definitions")
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 4ab30892f6ef..59823beed13f 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -43,7 +43,7 @@
#define PARF_PHY_REFCLK 0x4c
#define PARF_CONFIG_BITS 0x50
#define PARF_DBI_BASE_ADDR 0x168
-#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x16c /* Register offset specific to IP ver 2.3.3 */
+#define PARF_SLV_ADDR_SPACE_SIZE_2_3_3 0x358 /* Register offset specific to IP ver 2.3.3 */
#define PARF_MHI_CLOCK_RESET_CTRL 0x174
#define PARF_AXI_MSTR_WR_ADDR_HALT 0x178
#define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8
--
2.34.1
