On Thu, 23 Jul 2015, Bjorn Andersson wrote:
> On Thu 23 Jul 06:22 PDT 2015, Lee Jones wrote:
>
> > On Mon, 13 Jul 2015, Bjorn Andersson wrote:
> >
> > > On Tue 07 Jul 05:37 PDT 2015, Lee Jones wrote:
> > >
> > > > On Fri, 26 Jun 2015, bjorn@xxxxxxx wrote:
> > > >
> > > > > From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> > > [..]
> > >
> > > > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > >
> > > [..]
> > >
> > > > > +config MFD_QCOM_SMD_RPM
> > > > > + tristate "Qualcomm Resource Power Manager (RPM) over SMD"
> > > > > + depends on QCOM_SMD && OF
> > > > > + help
> > > > > + If you say yes to this option, support will be included for the
> > > > > + Resource Power Manager system found in the Qualcomm 8974 based
> > > > > + devices.
> > > > > +
> > > > > + This is required to access many regulators, clocks and bus
> > > > > + frequencies controlled by the RPM on these devices.
> > > > > +
> > > > > + Say M here if you want to include support for the Qualcomm RPM as a
> > > > > + module. This will build a module called "qcom-smd-rpm".
> > > >
> > > > I'm not exactly sure what makes this an MFD device.
> > > >
> > >
> > > It represents a piece of hardware (a micro-controller) that exposes
> > > control of a multitude of regulators and clocks in the Qualcomm
> > > platforms.
> > >
> > > It's basically just a successor of the qcom_rpm driver - same
> > > functionality but a new communication method is used.
> >
> > My point still stands. Please investigate moving this (and the
> > qcom_rpm driver if it's the same) into either drivers/soc or
> > drivers/platform. The support in these two directories _seem_ to be
> > pretty similar.
> >
>
> We had this exact discussion last year and I argued that a piece of
> hardware that exposes regulators and clocks - like most PMICs - is a
> mfd and you agreed and picked the driver.
I've become stricter since then. An IC which only does power
management should either live in drivers/power, or more recently they
have been described as platform specific drivers which have
subsequently been moved to drivers/platform. Particularly if they have
their own special, platform specific communication method/bus.
> I will have a word with Andy about moving this and the qcom_rpm driver
> out of mfd.
Thanks.
> > > > > diff --git a/drivers/mfd/qcom-smd-rpm.c b/drivers/mfd/qcom-smd-rpm.c
> > >
> > > [..]
> > >
> > > > > +
> > > > > +#define RPM_ERR_INVALID_RESOURCE "resource does not exist"
> > > >
> > > > I don't like this at all.
> > > >
> > >
> > > Which part of it?
> > >
> > > It should probably be a static const char *, inlined in the function
> > > below. Would that be to your liking?
> >
> > It would be better, but I never really see the point in initialising
> > variables with these types of messages. I'd get rid of the
> > superfluous chuff and just do:
> >
> > memcmp(msg->message, "resource does not exist", 23);
> >
>
> The point was simply to not have to write:
>
> if (msg->length == 23 && memcmp(msg->message, ..., 23);
>
> Simply because I don't like the first part of the expression. I'll
> rewrite it...
All this cruft just to avoid that?
Just define '23', then code looks good and problem vaporises.
> > > > > +static int qcom_smd_rpm_callback(struct qcom_smd_device *qsdev,
> > > > > + const void *data,
> > > > > + size_t count)
> > > > > +{
> > > > > + const struct qcom_rpm_header *hdr = data;
> > > > > + const struct qcom_rpm_message *msg;
> > > > > + const size_t inv_res_len = sizeof(RPM_ERR_INVALID_RESOURCE) - 1;
> > > > > + struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev);
> > > > > + const u8 *buf = data + sizeof(struct qcom_rpm_header);
> > > > > + const u8 *end = buf + hdr->length;
> > > > > + int status = 0;
> > > > > +
> > > > > + if (hdr->service_type != RPM_SERVICE_TYPE_REQUEST ||
> > > > > + hdr->length < sizeof(struct qcom_rpm_message)) {
> > > > > + dev_err(&qsdev->dev, "invalid request\n");
> > > > > + return 0;
> > > > > + }
> > > > > +
> > > > > + while (buf < end) {
> > > > > + msg = (struct qcom_rpm_message *)buf;
> > > > > + switch (msg->msg_type) {
> > > > > + case RPM_MSG_TYPE_MSG_ID:
> > > > > + break;
> > > > > + case RPM_MSG_TYPE_ERR:
> > > > > + if (msg->length == inv_res_len &&
> > > > > + !memcmp(msg->message,
> > > > > + RPM_ERR_INVALID_RESOURCE,
> > > > > + inv_res_len))
> > > >
> > > > strncpy(msg->message, "resource does not exist", 23);
> > > >
> > >
> > > No, I want to compare the content of msg->message with the string
> >
> > Yes, I just noticed that.
> >
> > > "resource does not exist" - as that's the only way to know what type of
> > > error we got.
> > >
> > > This is unfortunately how the protocol looks :/
> >
> > What about either my memcmp suggestion above or this then:
> >
> > strncmp(msg->message, "resource does not exist", 23);
> >
>
> That would require the string to be 0-terminated.
No it doesn't.
strNcmp, only compares the first N characters.
> > > > > +static struct qcom_smd_driver qcom_smd_rpm_driver = {
> > > > > + .probe = qcom_smd_rpm_probe,
> > > > > + .remove = qcom_smd_rpm_remove,
> > > > > + .callback = qcom_smd_rpm_callback,
> > > > > + .driver = {
> > > > > + .name = "qcom_smd_rpm",
> > > > > + .owner = THIS_MODULE,
> > > >
> > > > Remove this line.
> >
> > Still not 100% sure why you need your own 'special' driver struct. If
> > it's for the .callback, there are other ways to do this without having
> > to invent your own bus.
>
> Because the life cycle of these components are much like, say, USB -
> they can come and go. As such e.g. a platform_driver is not a good fit.
You mean they are hot-swappable? Don't we have any platform devices
which support that already?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
