Re: [PATCH 08/15] arm64: dts: qcom: sc7180-aspire1: use generic ADC channel node names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Krzysztof Kozlowski писал(а) 17.06.2023 22:15:
> ADC channel node names were changed to require generic 'channel'.  The
> user-visible part is defined via label.
> 
>   sc7180-acer-aspire1.dtb: adc@3100: 'charger-thermistor@4f', 'thermistor@4e' do not match any of the regexes: '^channel@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Thanks for fixing this up!

Reviewed-by: Nikita Travkin <nikita@xxxxxxx>

> ---
>  arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> index b637b4270f88..dbb48934d499 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
> @@ -314,16 +314,18 @@ &mdss_dsi0_phy {
>  };
>  
>  &pm6150_adc {
> -	thermistor@4e {
> +	channel@4e {
>  		reg = <ADC5_AMUX_THM2_100K_PU>;
>  		qcom,ratiometric;
>  		qcom,hw-settle-time = <200>;
> +		label = "thermistor";
>  	};
>  
> -	charger-thermistor@4f {
> +	channel@4f {
>  		reg = <ADC5_AMUX_THM3_100K_PU>;
>  		qcom,ratiometric;
>  		qcom,hw-settle-time = <200>;
> +		label = "charger_thermistor";
>  	};
>  };



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux