On 16.06.2023 20:57, Krzysztof Kozlowski wrote:
> Add driver for pin controller in Low Power Audio SubSystem (LPASS). The
> driver is similar to SM8450 LPASS pin controller, with difference in one
> new pin (gpio14).
8250*
8450 has a whole lot more!
The 8250 in fact does look almost identical.. Perhaps in this case it
would be sane to combine the two?
Konrad
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
> drivers/pinctrl/qcom/Kconfig | 10 ++
> drivers/pinctrl/qcom/Makefile | 1 +
> .../pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c | 167 ++++++++++++++++++
> 3 files changed, 178 insertions(+)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
>
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 634c75336983..9c43bc05c447 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -77,6 +77,16 @@ config PINCTRL_SM8250_LPASS_LPI
> Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
>
> +config PINCTRL_SM3550_LPASS_LPI
> + tristate "Qualcomm Technologies Inc SM8350 LPASS LPI pin controller driver"
> + depends on ARM64 || COMPILE_TEST
> + depends on PINCTRL_LPASS_LPI
> + help
> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> + (Low Power Island) found on the Qualcomm Technologies Inc SM8350
> + platform.
> +
> config PINCTRL_SM8450_LPASS_LPI
> tristate "Qualcomm Technologies Inc SM8450 LPASS LPI pin controller driver"
> depends on ARM64 || COMPILE_TEST
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 426ddbf35f32..76ffcfbffc8e 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
> obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
> obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
> +obj-$(CONFIG_PINCTRL_SM8350_LPASS_LPI) += pinctrl-sm8350-lpass-lpi.o
> obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
> obj-$(CONFIG_PINCTRL_SM8450_LPASS_LPI) += pinctrl-sm8450-lpass-lpi.o
> obj-$(CONFIG_PINCTRL_SM8550) += pinctrl-sm8550.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
> new file mode 100644
> index 000000000000..23cce59d1a95
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sm8350-lpass-lpi.c
> @@ -0,0 +1,167 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 20202-2023 Linaro Ltd.
> + */
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-lpass-lpi.h"
> +
> +enum lpass_lpi_functions {
> + LPI_MUX_dmic1_clk,
> + LPI_MUX_dmic1_data,
> + LPI_MUX_dmic2_clk,
> + LPI_MUX_dmic2_data,
> + LPI_MUX_dmic3_clk,
> + LPI_MUX_dmic3_data,
> + LPI_MUX_i2s1_clk,
> + LPI_MUX_i2s1_data,
> + LPI_MUX_i2s1_ws,
> + LPI_MUX_i2s2_clk,
> + LPI_MUX_i2s2_data,
> + LPI_MUX_i2s2_ws,
> + LPI_MUX_qua_mi2s_data,
> + LPI_MUX_qua_mi2s_sclk,
> + LPI_MUX_qua_mi2s_ws,
> + LPI_MUX_swr_rx_clk,
> + LPI_MUX_swr_rx_data,
> + LPI_MUX_swr_tx_clk,
> + LPI_MUX_swr_tx_data,
> + LPI_MUX_swr_tx_data2,
> + LPI_MUX_wsa_swr_clk,
> + LPI_MUX_wsa_swr_data,
> + LPI_MUX_gpio,
> + LPI_MUX__,
> +};
> +
> +static int gpio0_pins[] = { 0 };
> +static int gpio1_pins[] = { 1 };
> +static int gpio2_pins[] = { 2 };
> +static int gpio3_pins[] = { 3 };
> +static int gpio4_pins[] = { 4 };
> +static int gpio5_pins[] = { 5 };
> +static int gpio6_pins[] = { 6 };
> +static int gpio7_pins[] = { 7 };
> +static int gpio8_pins[] = { 8 };
> +static int gpio9_pins[] = { 9 };
> +static int gpio10_pins[] = { 10 };
> +static int gpio11_pins[] = { 11 };
> +static int gpio12_pins[] = { 12 };
> +static int gpio13_pins[] = { 13 };
> +static int gpio14_pins[] = { 14 };
> +
> +static const struct pinctrl_pin_desc sm8350_lpi_pins[] = {
> + PINCTRL_PIN(0, "gpio0"),
> + PINCTRL_PIN(1, "gpio1"),
> + PINCTRL_PIN(2, "gpio2"),
> + PINCTRL_PIN(3, "gpio3"),
> + PINCTRL_PIN(4, "gpio4"),
> + PINCTRL_PIN(5, "gpio5"),
> + PINCTRL_PIN(6, "gpio6"),
> + PINCTRL_PIN(7, "gpio7"),
> + PINCTRL_PIN(8, "gpio8"),
> + PINCTRL_PIN(9, "gpio9"),
> + PINCTRL_PIN(10, "gpio10"),
> + PINCTRL_PIN(11, "gpio11"),
> + PINCTRL_PIN(12, "gpio12"),
> + PINCTRL_PIN(13, "gpio13"),
> + PINCTRL_PIN(14, "gpio14"),
> +};
> +
> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5", "gpio14" };
> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> +static const char * const dmic1_clk_groups[] = { "gpio6" };
> +static const char * const dmic1_data_groups[] = { "gpio7" };
> +static const char * const dmic2_clk_groups[] = { "gpio8" };
> +static const char * const dmic2_data_groups[] = { "gpio9" };
> +static const char * const i2s2_clk_groups[] = { "gpio10" };
> +static const char * const i2s2_ws_groups[] = { "gpio11" };
> +static const char * const dmic3_clk_groups[] = { "gpio12" };
> +static const char * const dmic3_data_groups[] = { "gpio13" };
> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> +static const char * const i2s1_clk_groups[] = { "gpio6" };
> +static const char * const i2s1_ws_groups[] = { "gpio7" };
> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
> +
> +static const struct lpi_pingroup sm8350_groups[] = {
> + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
> + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _),
> + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
> + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
> + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
> + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
> + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
> + LPI_PINGROUP(14, 6, swr_rx_data, _, _, _),
> +};
> +
> +static const struct lpi_function sm8350_functions[] = {
> + LPI_FUNCTION(dmic1_clk),
> + LPI_FUNCTION(dmic1_data),
> + LPI_FUNCTION(dmic2_clk),
> + LPI_FUNCTION(dmic2_data),
> + LPI_FUNCTION(dmic3_clk),
> + LPI_FUNCTION(dmic3_data),
> + LPI_FUNCTION(i2s1_clk),
> + LPI_FUNCTION(i2s1_data),
> + LPI_FUNCTION(i2s1_ws),
> + LPI_FUNCTION(i2s2_clk),
> + LPI_FUNCTION(i2s2_data),
> + LPI_FUNCTION(i2s2_ws),
> + LPI_FUNCTION(qua_mi2s_data),
> + LPI_FUNCTION(qua_mi2s_sclk),
> + LPI_FUNCTION(qua_mi2s_ws),
> + LPI_FUNCTION(swr_rx_clk),
> + LPI_FUNCTION(swr_rx_data),
> + LPI_FUNCTION(swr_tx_clk),
> + LPI_FUNCTION(swr_tx_data),
> + LPI_FUNCTION(wsa_swr_clk),
> + LPI_FUNCTION(wsa_swr_data),
> +};
> +
> +static const struct lpi_pinctrl_variant_data sm8350_lpi_data = {
> + .pins = sm8350_lpi_pins,
> + .npins = ARRAY_SIZE(sm8350_lpi_pins),
> + .groups = sm8350_groups,
> + .ngroups = ARRAY_SIZE(sm8350_groups),
> + .functions = sm8350_functions,
> + .nfunctions = ARRAY_SIZE(sm8350_functions),
> +};
> +
> +static const struct of_device_id lpi_pinctrl_of_match[] = {
> + {
> + .compatible = "qcom,sm8350-lpass-lpi-pinctrl",
> + .data = &sm8350_lpi_data,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> +
> +static struct platform_driver lpi_pinctrl_driver = {
> + .driver = {
> + .name = "qcom-sm8350-lpass-lpi-pinctrl",
> + .of_match_table = lpi_pinctrl_of_match,
> + },
> + .probe = lpi_pinctrl_probe,
> + .remove = lpi_pinctrl_remove,
> +};
> +
> +module_platform_driver(lpi_pinctrl_driver);
> +MODULE_DESCRIPTION("QTI SM8350 LPI GPIO pin control driver");
> +MODULE_LICENSE("GPL");
