Hi Ivan, > -----Original Message----- > From: Ivan T. Ivanov [mailto:iivanov@xxxxxxxxxx] > Sent: Monday, July 20, 2015 3:14 PM > To: Sricharan R > Cc: devicetree@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; > galak@xxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux- > i2c@xxxxxxxxxxxxxxx; agross@xxxxxxxxxxxxxx; dmaengine@xxxxxxxxxxxxxxx; > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > Subject: Re: [PATCH V4 3/7] i2c: qup: Add V2 tags support > > > Hi Sricharan, > > On Thu, 2015-07-09 at 08:55 +0530, Sricharan R wrote: > > QUP from version 2.1.1 onwards, supports a new format of i2c command > > tags. Tag codes instructs the controller to perform a operation like > > read/write. This new tagging version supports bam dma and transfers of > > more than 256 bytes without 'stop' > > in between. Adding the support for the same. > > IIRC, more than 256 bytes in message is supported only in BAM(DMA) mode, > if this is true, please be more explicit in commit message. More than 256 byte read transfers are possible in V2 mode and not possible only in V1 mode. So qup_i2c_quirks should be populated only for V1 mode and V2 mode during probe. > > You haven't tried to read more than 256 bytes with this patch, right? See > qup_i2c_quirks ;-) Ya I have tested for 256 bytes transfer in my previous series, not on this one. My bad. Should have error'ed out with qup_i2c_quirks in place. Anyways will not populate qup_i2c_quirks for v2 mode. > > > > > > > struct qup_i2c_dev { > > struct device*dev; > > void __iomem*base; > > @@ -117,6 +138,7 @@ struct qup_i2c_dev { > > int in_blk_sz; > > > > unsigned longone_byte_t; > > + struct qup_i2c_blockblk; > > > > struct i2c_msg*msg; > > /* Current posion in user message buffer */ @@ -126,6 +148,14 > > @@ struct qup_i2c_dev { > > /* QUP core errors */ > > u32 qup_err; > > > > + int use_v2_tags; > > + > > + int (*qup_i2c_write_one)(struct qup_i2c_dev *qup, > > + struct i2c_msg *msg); > > + > > + int (*qup_i2c_read_one)(struct qup_i2c_dev *qup, > > + struct i2c_msg *msg); > > + > > Do we really need additional level of indirection? > > We have separate struct i2c_algorithm, then we have common > qup_i2c_read/write methods and then we have different read/write sub > functions. I don't think 3-4 lines code reuse deserve increased complexity. Infact I was thinking this way as well. But anyways wanted to get reviewed and see which was better. Will change this. > > <snip> > > > +static void qup_i2c_get_blk_data(struct qup_i2c_dev *qup, > > + struct i2c_msg *msg) { > > This is more like "set_blk_metadata". Second argument could fit line above. > Ok. Will change name and indentation. > > + memset(&qup->blk, 0, sizeof(qup->blk)); > > + > > + if (!qup->use_v2_tags) { > > + if (!(msg->flags & I2C_M_RD)) > > + qup->blk.tx_tag_len = 1; > > + return; > > + } > > + > > + qup->blk.data_len = msg->len; > > + qup->blk.count = (msg->len + QUP_READ_LIMIT - 1) / > > + QUP_READ_LIMIT; > > + > > + /* 4 bytes for first block and 2 writes for rest */ > > + qup->blk.tx_tag_len = 4 + (qup->blk.count - 1) * 2; > > + > > + /* There are 2 tag bytes that are read in to fifo for every block */ > > + if (msg->flags & I2C_M_RD) > > + qup->blk.rx_tag_len = qup->blk.count * 2; } > > + > > <snip> > > > +static int qup_i2c_get_tags(u8 *tags, struct qup_i2c_dev *qup, > > + struct i2c_msg > > +*msg) { > > This is more like "set_tags". Ok, will change. > > > + u16 addr = (msg->addr << 1) | ((msg->flags & I2C_M_RD) == > I2C_M_RD); > > + int len = 0; > > + int data_len; > > + > > + if (qup->blk.pos == 0) { > > + tags[len++] = QUP_TAG_V2_START; > > + tags[len++] = addr & 0xff; > > + > > + if (msg->flags & I2C_M_TEN) > > + tags[len++] = addr >> 8; > > + } > > + > > + /* Send _STOP commands for the last block */ > > + if (qup->blk.pos == (qup->blk.count - 1)) { > > + if (msg->flags & I2C_M_RD) > > + tags[len++] = QUP_TAG_V2_DATARD_STOP; > > + else > > + tags[len++] = QUP_TAG_V2_DATAWR_STOP; > > + } else { > > + if (msg->flags & I2C_M_RD) > > + tags[len++] = QUP_TAG_V2_DATARD; > > + else > > + tags[len++] = QUP_TAG_V2_DATAWR; > > + } > > + > > + data_len = qup_i2c_get_data_len(qup); > > + > > + /* 0 implies 256 bytes */ > > + if (data_len == QUP_READ_LIMIT) > > + tags[len++] = 0; > > + else > > + tags[len++] = data_len; > > + > > + return len; > > +} > > + Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
