[PATCH v4 15/22] interconnect: qcom: msm8916: Hook up RPM bus clk definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
 drivers/interconnect/qcom/msm8916.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/interconnect/qcom/msm8916.c b/drivers/interconnect/qcom/msm8916.c
index 196b05879896..be2a190a8b52 100644
--- a/drivers/interconnect/qcom/msm8916.c
+++ b/drivers/interconnect/qcom/msm8916.c
@@ -1231,6 +1231,7 @@ static const struct qcom_icc_desc msm8916_snoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = msm8916_snoc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8916_snoc_nodes),
+	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &msm8916_snoc_regmap_config,
 	.qos_offset = 0x7000,
 };
@@ -1259,6 +1260,7 @@ static const struct qcom_icc_desc msm8916_bimc = {
 	.type = QCOM_ICC_BIMC,
 	.nodes = msm8916_bimc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8916_bimc_nodes),
+	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &msm8916_bimc_regmap_config,
 	.qos_offset = 0x8000,
 };
@@ -1328,6 +1330,7 @@ static const struct qcom_icc_desc msm8916_pcnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = msm8916_pcnoc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8916_pcnoc_nodes),
+	.bus_clk_desc = &bus_0_clk,
 	.regmap_cfg = &msm8916_pcnoc_regmap_config,
 	.qos_offset = 0x7000,
 };

-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux