Re: [PATCH v4 2/8] clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Konrad,

On 5/27/2023 12:47 AM, Konrad Dybcio wrote:


On 10.05.2023 15:41, Sricharan Ramabadhran wrote:
Add support for the global clock controller found on IPQ5018
based devices.

Co-developed-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
---
  [v4] Fixed to use ARRAY_SIZE() wherever parent_data was used
       Changed GPL v2 to GPL as per comments

  drivers/clk/qcom/Kconfig       |   10 +-
  drivers/clk/qcom/Makefile      |    1 +
  drivers/clk/qcom/gcc-ipq5018.c | 3731 ++++++++++++++++++++++++++++++++
  3 files changed, 3740 insertions(+), 2 deletions(-)
  create mode 100644 drivers/clk/qcom/gcc-ipq5018.c

[...]

+struct clk_rcg2 lpass_axim_clk_src = {
+	.cmd_rcgr = 0x2E028,
Please use lowercase hex for non-macro-defines, all throughout the file.


 ok. Will fix this in V10.

[...]

+static struct clk_rcg2 system_noc_bfdcd_clk_src = {
Drop clocks that are managed in RPM, they will conflict.


  IPQ5018 does not have RPM.

Regards,
 Sricharan



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux