On 13.06.2023 00:14, Bjorn Andersson wrote:
> Define anchors for wiring up the USB Type-C graph in the board files.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sc8180x.dtsi | 48 +++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> index a7668f9e68d6..4144beb70cb4 100644
> --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
> @@ -2464,6 +2464,23 @@ usb_prim_qmpphy: phy@88e9000 {
>
> status = "disabled";
>
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_prim_qmpphy_out: endpoint {};
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_prim_qmpphy_dp_in: endpoint {};
> + };
> + };
> +
> usb_prim_ssphy: usb3-phy@88e9200 {
> reg = <0 0x088e9200 0 0x200>,
> <0 0x088e9400 0 0x200>,
> @@ -2513,6 +2530,23 @@ usb_sec_qmpphy: phy@88ee000 {
>
> status = "disabled";
>
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + usb_sec_qmpphy_out: endpoint {};
> + };
> +
> + port@2 {
> + reg = <2>;
> +
> + usb_sec_qmpphy_dp_in: endpoint {};
> + };
> + };
> +
> usb_sec_ssphy: usb3-phy@88e9200 {
> reg = <0 0x088ee200 0 0x200>,
> <0 0x088ee400 0 0x200>,
> @@ -2607,6 +2641,11 @@ usb_prim_dwc3: usb@a600000 {
> snps,dis_enblslpm_quirk;
> phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
> phy-names = "usb2-phy", "usb3-phy";
> +
> + port {
> + usb_prim_role_switch: endpoint {
> + };
> + };
> };
> };
>
> @@ -2659,6 +2698,11 @@ usb_sec_dwc3: usb@a800000 {
> snps,dis_enblslpm_quirk;
> phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
> phy-names = "usb2-phy", "usb3-phy";
> +
> + port {
> + usb_sec_role_switch: endpoint {
> + };
> + };
> };
> };
>
> @@ -2986,6 +3030,8 @@ dp0_in: endpoint {
>
> port@1 {
> reg = <1>;
> + mdss_dp0_out: endpoint {
> + };
> };
> };
>
> @@ -3060,6 +3106,8 @@ dp1_in: endpoint {
>
> port@1 {
> reg = <1>;
> + mdss_dp1_out: endpoint {
> + };
> };
> };
>
