Add SPI SLAVE mode support for GENI based QuPv3.
Signed-off-by: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
---
include/linux/soc/qcom/geni-se.h | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/include/linux/soc/qcom/geni-se.h b/include/linux/soc/qcom/geni-se.h
index 821a19135bb6..29e06905bc1f 100644
--- a/include/linux/soc/qcom/geni-se.h
+++ b/include/linux/soc/qcom/geni-se.h
@@ -35,6 +35,7 @@ enum geni_se_protocol_type {
GENI_SE_UART,
GENI_SE_I2C,
GENI_SE_I3C,
+ GENI_SE_SPI_SLAVE,
};
struct geni_wrapper;
@@ -73,12 +74,14 @@ struct geni_se {
/* Common SE registers */
#define GENI_FORCE_DEFAULT_REG 0x20
+#define GENI_OUTPUT_CTRL 0x24
#define SE_GENI_STATUS 0x40
#define GENI_SER_M_CLK_CFG 0x48
#define GENI_SER_S_CLK_CFG 0x4c
#define GENI_IF_DISABLE_RO 0x64
#define GENI_FW_REVISION_RO 0x68
#define SE_GENI_CLK_SEL 0x7c
+#define SE_GENI_CFG_SEQ_START 0x84
#define SE_GENI_DMA_MODE_EN 0x258
#define SE_GENI_M_CMD0 0x600
#define SE_GENI_M_CMD_CTRL_REG 0x604
@@ -111,6 +114,9 @@ struct geni_se {
/* GENI_FORCE_DEFAULT_REG fields */
#define FORCE_DEFAULT BIT(0)
+/* GENI_OUTPUT_CTRL fields */
+#define GENI_IO_MUX_0_EN BIT(0)
+
/* GENI_STATUS fields */
#define M_GENI_CMD_ACTIVE BIT(0)
#define S_GENI_CMD_ACTIVE BIT(12)
@@ -130,6 +136,9 @@ struct geni_se {
/* GENI_CLK_SEL fields */
#define CLK_SEL_MSK GENMASK(2, 0)
+/* SE_GENI_CFG_SEQ_START fields */
+#define START_TRIGGER BIT(0)
+
/* SE_GENI_DMA_MODE_EN */
#define GENI_DMA_MODE_EN BIT(0)
--
2.17.1
