On Mon, Jun 12, 2023 at 11:23:43AM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> On sa8775p we don't use the RGMII clock but have an additional PHYAUX
> clock so add support for it to the driver.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> index 252dca400071..2f6b9b419601 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
> @@ -94,6 +94,7 @@ struct qcom_ethqos {
>
> unsigned int rgmii_clk_rate;
> struct clk *rgmii_clk;
> + struct clk *phyaux_clk;
> struct phy *serdes_phy;
> unsigned int speed;
>
> @@ -604,6 +605,13 @@ static int ethqos_clks_config(void *priv, bool enabled)
> return ret;
> }
>
> + ret = clk_prepare_enable(ethqos->phyaux_clk);
> + if (ret) {
> + clk_disable_unprepare(ethqos->rgmii_clk);
> + dev_err(ðqos->pdev->dev, "phyaux enable failed\n");
> + return ret;
> + }
> +
> /* Enable functional clock to prevent DMA reset to timeout due
> * to lacking PHY clock after the hardware block has been power
> * cycled. The actual configuration will be adjusted once
> @@ -611,6 +619,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
> */
> ethqos_set_func_clk_en(ethqos);
> } else {
> + clk_disable_unprepare(ethqos->phyaux_clk);
> clk_disable_unprepare(ethqos->rgmii_clk);
> }
>
> @@ -669,6 +678,12 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
> goto out_config_dt;
> }
>
> + ethqos->phyaux_clk = devm_clk_get_optional(dev, "phyaux");
> + if (IS_ERR(ethqos->phyaux_clk)) {
> + ret = PTR_ERR(ethqos->phyaux_clk);
> + goto out_config_dt;
> + }
> +
Similar comment to the prior patch about whether or not this should be
optional (or selected via platform compatible and required),
otherwise looks good.
> ret = ethqos_clks_config(ethqos, true);
> if (ret)
> goto out_config_dt;
> --
> 2.39.2
>
