On 08/06/2023 10:11, Alexander Stein wrote:
> Convert the binding to DT schema format. Change the GPIO properties to new
> naming convention using -gpios as well.
>
> Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> ---
> .../bindings/extcon/extcon-usb-gpio.txt | 21 --------
> .../bindings/extcon/extcon-usb-gpio.yaml | 52 +++++++++++++++++++
> 2 files changed, 52 insertions(+), 21 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> create mode 100644 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
>
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> deleted file mode 100644
> index dfc14f71e81fb..0000000000000
> --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -USB GPIO Extcon device
> -
> -This is a virtual device used to generate USB cable states from the USB ID pin
> -connected to a GPIO pin.
> -
> -Required properties:
> -- compatible: Should be "linux,extcon-usb-gpio"
> -
> -Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
> -- id-gpio: gpio for USB ID pin. See gpio binding.
> -- vbus-gpio: gpio for USB VBUS pin.
> -
> -Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
> - extcon_usb1 {
> - compatible = "linux,extcon-usb-gpio";
> - id-gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> - }
> -
> - &omap_dwc3_1 {
> - extcon = <&extcon_usb1>;
> - };
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
> new file mode 100644
> index 0000000000000..3a71d848dc7a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/extcon/extcon-usb-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: USB GPIO Extcon device
> +
> +maintainers:
> + - Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> +
> +description: |
> + This is a virtual device used to generate USB cable states from the
> + USB ID pin connected to a GPIO pin.
> +
> +properties:
> + compatible:
> + const: linux,extcon-usb-gpio
> +
> + id-gpios:
> + description: An input gpio for USB ID pin.
> + maxItems: 1
> +
> + vbus-gpios:
> + description: An input gpio for USB VBus pin, used to detect presence of
> + VBUS 5V.
> + maxItems: 1
> +
> +required:
> + - compatible
> +
> +anyOf:
oneOf instead
> + - required:
> + - id-gpios
> + - required:
> + - vbus-gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + extcon_usb1 {
No underscores, generic node names, so just "extcon-usb"
> + compatible = "linux,extcon-usb-gpio";
> + id-gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> + vbus-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
> + };
> +
> + usb-controller {
> + extcon = <&extcon_usb1>;
> + };
Drop controller, no need to add consumers in a provider's binding.
Best regards,
Krzysztof
