On Fri, Jun 09, 2023 at 10:19:19PM +0200, Konrad Dybcio wrote:
> Assign the necessary definitions to migrate to the new bus clock
> handling mechanism.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> ---
> drivers/interconnect/qcom/msm8939.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c
> index 639566dce45a..94b11b590a8e 100644
> --- a/drivers/interconnect/qcom/msm8939.c
> +++ b/drivers/interconnect/qcom/msm8939.c
> @@ -1284,6 +1284,7 @@ static const struct qcom_icc_desc msm8939_snoc = {
> .type = QCOM_ICC_NOC,
> .nodes = msm8939_snoc_nodes,
> .num_nodes = ARRAY_SIZE(msm8939_snoc_nodes),
> + .bus_clk_desc = &bus_1_clk,
> .regmap_cfg = &msm8939_snoc_regmap_config,
> .qos_offset = 0x7000,
> };
> @@ -1304,6 +1305,7 @@ static const struct qcom_icc_desc msm8939_snoc_mm = {
> .type = QCOM_ICC_NOC,
> .nodes = msm8939_snoc_mm_nodes,
> .num_nodes = ARRAY_SIZE(msm8939_snoc_mm_nodes),
> + .bus_clk_desc = &bus_2_clk,
> .regmap_cfg = &msm8939_snoc_regmap_config,
> .qos_offset = 0x7000,
> };
> @@ -1332,6 +1334,7 @@ static const struct qcom_icc_desc msm8939_bimc = {
> .type = QCOM_ICC_BIMC,
> .nodes = msm8939_bimc_nodes,
> .num_nodes = ARRAY_SIZE(msm8939_bimc_nodes),
> + .bus_clk_desc = &bimc_clk,
> .regmap_cfg = &msm8939_bimc_regmap_config,
> .qos_offset = 0x8000,
> };
> @@ -1403,6 +1406,7 @@ static const struct qcom_icc_desc msm8939_pcnoc = {
> .type = QCOM_ICC_NOC,
> .nodes = msm8939_pcnoc_nodes,
> .num_nodes = ARRAY_SIZE(msm8939_pcnoc_nodes),
> + .bus_clk_desc = &bus_0_clk,
> .regmap_cfg = &msm8939_pcnoc_regmap_config,
> .qos_offset = 0x7000,
> };
>
> --
> 2.41.0
>
