Re: [PATCH] regulator: qcom-rpmh: Fix regulators for PM8550

[Rajendra Nayak <quic_rjendra@xxxxxxxxxxx>]

On 6/5/2023 5:26 PM, Abel Vesa wrote:
> The PM8550 uses only NLDOs 515 and the LDO 6 through 8 are low voltage
> type, so fix accordingly.

I was seeing a bunch of LDO initialization's fail while bringing up an
upcoming SoC/Board which uses these same set of PMIC's, some of those
are fixed with this patch, but I still have a couple more failing due
to the voltage that I try to init them to being out of range based on
their voltage range, can you pls check if those are of the right type?

The ones now failing are, ldo12 from pm8550 and smps4 from pm8550ve.

> Fixes: e6e3776d682d ("regulator: qcom-rpmh: Add support for PM8550 regulators")
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
> ---
>   drivers/regulator/qcom-rpmh-regulator.c | 30 ++++++++++++-------------
>   1 file changed, 15 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
> index b0a58c62b1e2..f3b280af0773 100644
> --- a/drivers/regulator/qcom-rpmh-regulator.c
> +++ b/drivers/regulator/qcom-rpmh-regulator.c
> @@ -1057,21 +1057,21 @@ static const struct rpmh_vreg_init_data pm8450_vreg_data[] = {
>   };
>   
>   static const struct rpmh_vreg_init_data pm8550_vreg_data[] = {
> -	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_pldo,    "vdd-l1-l4-l10"),
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo515,    "vdd-l1-l4-l10"),
>   	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,    "vdd-l2-l13-l14"),
> -	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,    "vdd-l3"),
> -	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,    "vdd-l1-l4-l10"),
> +	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo515,    "vdd-l3"),
> +	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo515,    "vdd-l1-l4-l10"),
>   	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,    "vdd-l5-l16"),
> -	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo_lv, "vdd-l6-l7"),
> -	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv, "vdd-l6-l7"),
> -	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo_lv, "vdd-l8-l9"),
> +	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo, "vdd-l6-l7"),
> +	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo, "vdd-l6-l7"),
> +	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo, "vdd-l8-l9"),
>   	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,    "vdd-l8-l9"),
> -	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo,    "vdd-l1-l4-l10"),
> -	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo,    "vdd-l11"),
> +	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_nldo515,    "vdd-l1-l4-l10"),
> +	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_nldo515,    "vdd-l11"),
>   	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo,    "vdd-l12"),
>   	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_pldo,    "vdd-l2-l13-l14"),
>   	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo,    "vdd-l2-l13-l14"),
> -	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_pldo,    "vdd-l15"),
> +	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_nldo515,    "vdd-l15"),
>   	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_pldo,    "vdd-l5-l16"),
>   	RPMH_VREG("ldo17",  "ldo%s17", &pmic5_pldo,    "vdd-l17"),
>   	RPMH_VREG("bob1",   "bob%s1",  &pmic5_bob,     "vdd-bob1"),
> @@ -1086,9 +1086,9 @@ static const struct rpmh_vreg_init_data pm8550vs_vreg_data[] = {
>   	RPMH_VREG("smps4",  "smp%s4",  &pmic5_ftsmps525_lv, "vdd-s4"),
>   	RPMH_VREG("smps5",  "smp%s5",  &pmic5_ftsmps525_lv, "vdd-s5"),
>   	RPMH_VREG("smps6",  "smp%s6",  &pmic5_ftsmps525_mv, "vdd-s6"),
> -	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,   "vdd-l1"),
> -	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,   "vdd-l2"),
> -	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,   "vdd-l3"),
> +	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo515,   "vdd-l1"),
> +	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo515,   "vdd-l2"),
> +	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo515,   "vdd-l3"),
>   	{}
>   };
>   
> @@ -1101,9 +1101,9 @@ static const struct rpmh_vreg_init_data pm8550ve_vreg_data[] = {
>   	RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps525_lv, "vdd-s6"),
>   	RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps525_lv, "vdd-s7"),
>   	RPMH_VREG("smps8", "smp%s8", &pmic5_ftsmps525_lv, "vdd-s8"),
> -	RPMH_VREG("ldo1",  "ldo%s1", &pmic5_nldo,   "vdd-l1"),
> -	RPMH_VREG("ldo2",  "ldo%s2", &pmic5_nldo,   "vdd-l2"),
> -	RPMH_VREG("ldo3",  "ldo%s3", &pmic5_nldo,   "vdd-l3"),
> +	RPMH_VREG("ldo1",  "ldo%s1", &pmic5_nldo515,   "vdd-l1"),
> +	RPMH_VREG("ldo2",  "ldo%s2", &pmic5_nldo515,   "vdd-l2"),
> +	RPMH_VREG("ldo3",  "ldo%s3", &pmic5_nldo515,   "vdd-l3"),
>   	{}
>   };
>