Re: [PATCH v4 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24/05/2023 11:36, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
> ---
> [v4]:
> 	Add description about IPQ9574 and remove unnecessary
> 	additions to the file
> [v3]:
> 	Fix dt_binding_check & dtbs_check errors (Used
> 	Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
> 	as reference/example)
> 
> 	Drop 'Acked-by: Rob Herring' as suggested in review
> 
> [v2]:
> 	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> 	for the tip to make qcom,ipq8074-tsens as fallback.
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index d1ec963..1a752e0 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -16,9 +16,14 @@ description: |
>    The IP versions are named v0.1, v1 and v2 in the driver, where v0.1 captures
>    everything before v1 when there was no versioning information.
>  
> +  Since IPQ9574 is similar to IPQ8074, mapping it to IPQ8074 without
> +  introducing a new compatible.
> +
>  properties:
>    compatible:
>      oneOf:
> +      - const: qcom,ipq8074-tsens

No, no need to move it to const. Was correct before.
> +
>        - description: msm8960 TSENS based
>          items:
>            - enum:
> @@ -64,8 +69,10 @@ properties:
>            - const: qcom,tsens-v2
>  
>        - description: v2 of TSENS with combined interrupt
> -        enum:
> -          - qcom,ipq8074-tsens

Again, "-" means you remove a diff hunk. `man diff` and `man patch` (or
Wikipedia, dunno).

> +        items:
> +          - enum:
> +              - qcom,ipq9574-tsens
> +          - const: qcom,ipq8074-tsens

No, do not touch existing entry.

You need new item on entire list with two compatibles:

+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens

That's it. There should be no removal hunks in your diff (so one with "-").

Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux