Re: [PATCH v4 0/3] Use PSCI OS initiated mode for sc7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 25 May 2023 at 04:41, Bjorn Andersson <andersson@xxxxxxxxxx> wrote:
>
> On Wed, May 24, 2023 at 11:56:28AM +0200, Ulf Hansson wrote:
> > On Mon, 24 Apr 2023 at 13:09, Maulik Shah <quic_mkshah@xxxxxxxxxxx> wrote:
> > >
> > > Changes in v4:
> > > - Add missing s-o-b line and reviewed by in patch 1
> > > - Address ulf's comments for error handling in patch 2
> > >
> > > Changes in v3:
> > > - Add new change to provide helper function dt_idle_pd_remove_topology()
> > > - Address ulf's comments for error handling
> > > - Add reviewed by ulf for devicetree change
> > >
> > > Changes in v2:
> > > - Add new change to Move enabling OSI mode after power domains creation
> > > - Fix compatible string to domains-idle-states for cluster idle state.
> > > - Update cover letter with some more details on OSI and PC mode
> > >   comparision
> > >
> > > The dependency [2] is now merged in trustedfirmware project.
> > >
> > > Stats comparision between OSI and PC mode are captured at [3] with
> > > usecase
> > > details, where during multiple CPUs online the residency in cluster idle
> > > state is better with OSI and also inline with single CPU mode. In PC
> > > mode
> > > with multiple CPUs cluster idle state residency is dropping compare to
> > > single CPU mode.
> > >
> > > Recording of this meeting is also available at [4].
> > >
> > > This change adds power-domains for cpuidle states to use PSCI OS
> > > initiated mode for sc7280.
> > >
> > > This change depends on external project changes [1] & [2] which are
> > > under review/discussion to add PSCI os-initiated support in Arm Trusted
> > > Firmware.
> > >
> > > I can update here once the dependency are in and change is ready to
> > > merge.
> > >
> > > [1] https://review.trustedfirmware.org/q/topic:psci-osi
> > > [2] https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/19487
> > > [3] https://www.trustedfirmware.org/docs/PSCI-OS-initiated.pdf
> > > [4] https://www.trustedfirmware.org/meetings/tf-a-technical-forum
> > >
> > > Maulik Shah (3):
> > >   cpuidle: dt_idle_genpd: Add helper function to remove genpd topology
> > >   cpuidle: psci: Move enabling OSI mode after power domains creation
> > >   arm64: dts: qcom: sc7280: Add power-domains for cpuidle states
> > >
> > >  arch/arm64/boot/dts/qcom/sc7280.dtsi  | 98 ++++++++++++++++++++-------
> > >  drivers/cpuidle/cpuidle-psci-domain.c | 39 ++++-------
> > >  drivers/cpuidle/dt_idle_genpd.c       | 24 +++++++
> > >  drivers/cpuidle/dt_idle_genpd.h       |  7 ++
> > >  4 files changed, 117 insertions(+), 51 deletions(-)
> > >
> >
> > Looks like this series has not been queued up yet. Note that patch1
> > and patch2 are needed for stable kernels too. Moreover, patch3 (Qcom
> > DTS change) is dependent on patch 1 and patch2.
> >
> > Therefore I suggest Bjorn to pick this up via the Qcom SoC tree.
> > Bjorn, is that okay for you?
> >
>
> Sorry, this fell between the chairs after you pointed me to it...
>
> I can certainly pick the 3 patches through my tree, but are they fixing
> any current regressions, or is it just that we need the first two
> patches to land before the 3rd patch?

I am not aware of any current regressions.

>
> I also presume the 3rd patch is only needed when paired with the new
> ATF?

Patch3 is beneficial to use with a new TF-A, but works with an old
TF-A too. Anyway, forget what I said about patch3 earlier, as that was
just not the complete information.

The problem is that we can't be using a new TF-A (supporting both PSCI
OSI and PC mode) without patch1 and patch2, unless we are using
patch3.

Thus, I strongly suggest we tag patch1 and patch2 for stable kernels,
to avoid any potential conflicts of TF-A versions that may be used.

>
> Regards,
> Bjorn

Did that make more sense?

Br
Uffe



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux