Re: [PATCH 0/5] MDSS reg bus interconnect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/05/2023 10:42, Konrad Dybcio wrote:


On 29.05.2023 04:42, Dmitry Baryshkov wrote:
On Mon, 17 Apr 2023 at 18:30, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:

Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there's
another path that needs to be handled to ensure MDSS functions properly,
namely the "reg bus", a.k.a the CPU-MDSS interconnect.

Gating that path may have a variety of effects.. from none to otherwise
inexplicable DSI timeouts..

This series tries to address the lack of that.

Example path:

interconnects = <&bimc MASTER_AMPSS_M0 0 &config_noc SLAVE_DISPLAY_CFG 0>;

If we are going to touch the MDSS interconnects, could you please also
add the rotator interconnect to the bindings?
We do not need to touch it at this time, but let's not have to change
bindings later again.

Ack

Also, several points noted from the mdss fbdev driver:

- All possible clents vote for the low bw setting. This includes DSI, HDMI, MDSS itself and INTF - SMMU also casts such vote, which I do not think should be necessary, unless there is a separate MDSS SMMU? - PINGPONG cacsts high bw setting for the sake of speeding up the LUT tables if required.

--
With best wishes
Dmitry




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux