[RFC 0/2] drm/dsi: DSI for devices with different control bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We are currently restricted when it comes to supporting DSI on devices
that have a non-DSI control bus. For example, DSI encoder chips are
available in the market that are configured via i2c. Configuring their
registers via DSI bus is either optional or not available at all.

These devices still need to pass DSI parameters (data lanes, mode flags
etc) to the DSI host they are connected to. We don't have a way to do
that at the moment.

The method presented in these patches is to provide an API to create a
'dummy' mipi_dsi_device. This device is populated with the desired DSI
params, which are passed on to the host via mipi_dsi_attach().

This method will require the device driver to get a phandle to the DSI
host since there is no parent-child relation between the two.

Is there a better way to do this? Please let me know!

Archit Taneja (2):
  drm/dsi: Create dummy DSI devices
  drm/dsi: Get DSI host by DT device node

 drivers/gpu/drm/drm_mipi_dsi.c | 108 ++++++++++++++++++++++++++++++++++++++++-
 include/drm/drm_mipi_dsi.h     |   4 ++
 2 files changed, 110 insertions(+), 2 deletions(-)

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux