On 23/05/2023 15:14, Dmitry Baryshkov wrote:
The MSM HDMI PHYs have been using the ad-hoc approach / API instead of using the generic API framework. Move all the PHYs to drivers/phy/qualcomm and rework them to use generic PHY framework. This way all the QMP-related code is kept close. Also in future this will allow us to use a common set of functions to setup msm8974 HDMI PHY, 28nm DSI PHY and apq8964 SATA PHY (which all use UNI PLL internally). This also causes some design changes. Currently on msm8996 the HDMI PLL implements clock's set_rate(), while other HDMI PHY drivers used the ad-hoc PHY API for setting the PLL rate (this includes in-tree msm8960 driver and posted, but not merged, msm8974 driver). This might result in the PLL being set to one rate, while the rest of the PHY being tuned to work at another rate. Adopt the latter idea and always use phy_configure() to tune the PHY and set the PLL rate.
Forgot to mention that this also features msm8974 HDMI PLL code, so modeswitching HDMI output on msm8974 is now possible.
-- With best wishes Dmitry
