On 24/06/15 18:47, Stefan Wahren wrote:
Hi Srinivas,
Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> hat am 24. Juni 2015 um
15:03 geschrieben:
On 24/06/15 13:30, Stefan Wahren wrote:
If the question is just about hexdump, then hexdump itself can read
file from given offset and size.
yes, this is my question at first. Let me show the difference between
the current implementation and my expectations as a user.
$ hexdump /sys/class/nvmem/mxs-ocotp/nvmem
Current implementation: dump the complete register range defined in DT
Its dumping the range which is specified in the provider regmap. If the
requirement is to dump only particular range, this has to be made
explicit while creating regmap, which is to specify the base address to
start from "First data register" and max_register to be "Last data
register "- "First data register"
i know about max_register, but i can't find the base address in regmap_config.
Base is not in the regmap config, its the value which you pass to the
For example, if I had to do similar change to qfprom driver It would
look like:
><-----------------------cut---------------------------------><
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 7f7a82f..26ced95 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -52,9 +52,9 @@ static int qfprom_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
- qfprom_regmap_config.max_register = resource_size(res) - 1;
+ qfprom_regmap_config.max_register = my_data_size;
- regmap = devm_regmap_init_mmio(dev, base, &qfprom_regmap_config);
+ regmap = devm_regmap_init_mmio(dev, base + data_offset,
&qfprom_regmap_config);
if (IS_ERR(regmap)) {
dev_err(dev, "regmap init failed\n");
return PTR_ERR(regmap);
><-----------------------cut---------------------------------><
--srini
Do you mean struct regmap_access_table *rd_table ?
User expectation: dump only the data from OCOTP block
Let me explain it for i.MX28 OCOTP
0x8002c000 // Start of OCOTP register block (defined in DT)
0x8002c020 // First data register
0x8002c290 // Last data register
0x8002dfff // End of OCOTP register block (defined in DT)
My knowledge about regmap is limited, but how can i achieve that hexdump
give me only the data registers? From my understanding this should be
handled in regmap and not in the read function.
Setup the base and regmap_config correctly in the provider driver before
calling regmap_init_mmio().
Let me know if you need more details.
Yes, please.
Stefan
--srini
Are my expectations about the raw access wrong?
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
