While working on the QMP binding cleanup, I noticed that USB QMP driver supports both simple USB PHYs (which should be updated) and USB-only part of USB+DP PHYs (which are largely legacy and don't need to be updated). To ease further cleanup perform a quick cleanup of the last remaining USB+DP PHY (on sm8150 platform) and split the legacy codepath from the USB QMP PHY driver. Dmitry Baryshkov (5): dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: add sm8150 USB+DP PHY phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings phy: qcom-qmp-usb: split off the legacy USB+dp_com support .../phy/qcom,msm8996-qmp-usb3-phy.yaml | 80 - .../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 2 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +- drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 + .../phy/qualcomm/phy-qcom-qmp-usb-legacy.c | 1407 +++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 556 ------- 8 files changed, 1437 insertions(+), 640 deletions(-) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c -- 2.39.2
