Re: [PATCH 10/11] arm64: dts: qcom: ipq5018: Add MP03.5-c1 board support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/7/2023 7:45 PM, Kathiravan T wrote:

On 3/7/2023 10:11 AM, Manikanta Mylavarapu wrote:
Add initial device tree support for the MP03.5-C1 board.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/Makefile             |  1 +
  .../arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts | 64 +++++++++++++++++++
  2 files changed, 65 insertions(+)
  create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index b77a95e97a56..10d1eafe57e4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_QCOM)    += apq8094-sony-xperia-kitakami-karin_windy.dtb
  dtb-$(CONFIG_ARCH_QCOM)    += apq8096-db820c.dtb
  dtb-$(CONFIG_ARCH_QCOM)    += apq8096-ifc6640.dtb
  dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.1-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)    += ipq5018-mp03.5-c1.dtb
  dtb-$(CONFIG_ARCH_QCOM)    += ipq6018-cp01-c1.dtb
  dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk01.dtb
  dtb-$(CONFIG_ARCH_QCOM)    += ipq8074-hk10-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
new file mode 100644
index 000000000000..51ddd7367ac6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-mp03.5-c1.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 CP01 board device tree source
+ *
+ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+    model = "Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1";
+    compatible = "qcom,ipq5018-mp03.5-c1", "qcom,ipq5018";
+
+    aliases {
+        serial0 = &blsp1_uart1;
+    };
+
+    chosen {
+        bootargs = "console=ttyMSM0,115200,n8 rw init=/init swiotlb=1 coherent_pool=2M";


Is the bootargs required?


No, i will remove it.
+        stdout-path = "serial0:115200n8";
+    };
+};
+
+&tlmm {
+    blsp0_uart_pins: uart_pins {


node name should be uart-state {. Didn't dtbs_check complain it or am I missing something?


Yeah, it should be. I will correct it.
+        pins = "gpio20", "gpio21";
+        function = "blsp0_uart0";
+        bias-disable;
+    };
+};
+
+&blsp1_uart1 {
+    pinctrl-0 = <&blsp0_uart_pins>;
+    pinctrl-names = "default";
+    status = "ok";


s/ok/okay/


I will update.
+};
+
+&q6v5_wcss {
+    q6_wcss_pd1: remoteproc_pd1 {
+        interrupts-extended = <&wcss_smp2p_in 8 0>,
+                <&wcss_smp2p_in 9 0>,
+                <&wcss_smp2p_in 12 0>,
+                <&wcss_smp2p_in 11 0>;


please align all these entries


I will do it.
+        interrupt-names = "fatal",
+                "ready",
+                "spawn-ack",
+                "stop-ack";
+        qcom,smem-states = <&wcss_smp2p_out 8>,
+                <&wcss_smp2p_out 9>,
+                <&wcss_smp2p_out 10>;
+        qcom,smem-state-names = "shutdown",
+                    "stop",
+                    "spawn";
+    };


leave a blank line


Sure, I will do it.
+    q6_wcss_pd2: remoteproc_pd2 {
+        status = "okay";
+    };
+
+    q6_wcss_pd3: remoteproc_pd3 {
+        status = "okay";
+    };
+};



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux