Hello,
On 15-06-23 21:47:34, Stefan Wahren wrote:
> Hi Srinivas,
>
> > Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> hat am 23. Juni 2015 um
> > 01:07 geschrieben:
> >
> >
> > [...]
> >
> > Device Tree:
> >
> > /* Provider */
> > qfprom: qfprom@00700000 {
> > ...
> >
> > /* Data cells */
> > tsens_calibration: calib@404 {
> > reg = <0x404 0x10>;
> > };
> >
> > tsens_calibration_bckp: calib_bckp@504 {
> > reg = <0x504 0x11>;
> > bit-offset = 6;
> > nbits = 128;
> > };
> >
> > pvs_version: pvs-version@6 {
> > reg = <0x6 0x2>
> > bit-offset = 7;
> > nbits = 2;
> > };
> >
> > speed_bin: speed-bin@c{
> > reg = <0xc 0x1>;
> > bit-offset = 2;
> > nbits = 3;
> >
> > };
> > ...
> > };
> >
> > userspace interface: binary file in /sys/class/nvmem/*/nvmem
> >
> > ex:
> > hexdump /sys/class/nvmem/qfprom0/nvmem
> >
> > 0000000 0000 0000 0000 0000 0000 0000 0000 0000
> > *
> > 00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
> > 0000000 0000 0000 0000 0000 0000 0000 0000 0000
> > ...
> > *
> > 0001000
> >
>
> i want to port OCOTP driver for MXS, which hasn't MMIO. From my understanding
> hexdump would readout the complete register range defined in provider DT node.
>
> How can i achieve that hexdump only reads the data area within the register
> range?
I also had a similar question in my mind.
- Sanchayan.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
