Hexagon 692 DSP & FastRPC declarations in sc7180 Device Tree Files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Arm64 Linux Community,

the sc7180 device tree files are missing the declaration of the Hexagon
692 DSP that's providing the Qualcomm AI Engine on this SoC [1] based on
the FastRPC driver. In contrast, the sc8280xp device tree files do
include the corresponding declarations [2] and the cDSP does show up as
/dev/fastrpc-cdsp{,-secure} on sc8280xp based devices.

Is there anyone in the community, perhaps folks at Linaro or QuIC that
might have access to the hardware documentation and could help provide
the information required to declare the DSP in the device tree? This
should require the cDSP base address, the number of compute-cb nodes
as well as their correct iommu and reg values.

Hexagon 692 DSP supports 5 TOPS, so declaring support in the device tree
can unlock simple, but non-trivial and interactive use-cases with, for
example, GPT-2-Large style models compiled for Hexagon with Apache TVM.

Best regards,
Leonard Lausen

[1]: https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/prod_brief_qcom_sd7c_2.pdf
[2]: https://github.com/torvalds/linux/blob/v6.3/arch/arm64/boot/dts/qcom/sc8280xp.dtsi#L4045-L4174




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux