Re: [PATCH v8 6/9] usb: dwc3: qcom: Add multiport controller support for qcom wrapper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 5/17/2023 10:07 PM, Johan Hovold wrote:
On Tue, May 16, 2023 at 07:49:14AM +0530, Krishna Kurapati PSSNV wrote:


On 5/16/2023 3:57 AM, Bjorn Andersson wrote:
On Sun, May 14, 2023 at 11:19:14AM +0530, Krishna Kurapati wrote:

-#define PWR_EVNT_IRQ_STAT_REG			0x58
+#define PWR_EVNT_IRQ1_STAT_REG			0x58
+#define PWR_EVNT_IRQ2_STAT_REG			0x1dc
+#define PWR_EVNT_IRQ3_STAT_REG			0x228
+#define PWR_EVNT_IRQ4_STAT_REG			0x238
   #define PWR_EVNT_LPM_IN_L2_MASK			BIT(4)
   #define PWR_EVNT_LPM_OUT_L2_MASK		BIT(5)
@@ -93,6 +96,13 @@ struct dwc3_qcom {
   	struct icc_path		*icc_path_apps;
   };
+static u32 pwr_evnt_irq_stat_reg_offset[4] = {
+			PWR_EVNT_IRQ1_STAT_REG,
+			PWR_EVNT_IRQ2_STAT_REG,
+			PWR_EVNT_IRQ3_STAT_REG,
+			PWR_EVNT_IRQ4_STAT_REG,

Seems to be excessive indentation of these...

Can you also please confirm that these should be counted starting at 1 -
given that you otherwise talk about port0..N-1?

    I am fine with either way. Since this just denoted 4 different ports,
I named them starting with 1. Either ways, we will run through array
from (0-3), so we must be fine.

Actually, the USB ports are indexed from 1, so the above naming may or
may not be correct depending on how they are defined.

Ok, will rename them as PWR_EVNT_IRQx_STAT_REG  (x = 0,1,2,3)

+};
+
   static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
   {
   	u32 reg;
@@ -413,13 +423,16 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
   {
   	u32 val;
   	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
if (qcom->is_suspended)
   		return 0;
- val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
-	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
-		dev_err(qcom->dev, "HS-PHY not in L2\n");
+	for (i = 0; i < dwc->num_usb2_ports; i++) {

In the event that the dwc3 core fails to acquire or enable e.g. clocks
its drvdata will be NULL. If you then hit a runtime pm transition in the
dwc3-qcom glue you will dereference NULL here. (You can force this issue
by e.g. returning -EINVAL from dwc3_clk_enable()).

So if you're peaking into qcom->dwc3 you need to handle the fact that
dwc might be NULL, here and in resume below.

Thanks for catching this. You are right, there were instances where the
we saw probe for dwc3 being deferred while the probe for dwc3-qcom was
still successful [1]. In this case, if the dwc3 probe never happened and
system tries to enter suspend, we might hit a NULL pointer dereference.

I don't think we should be adding more of these layering violations. A
parent device driver has no business messing with the driver data for a
child device which may or may not even have probed yet.

I added a FIXME elsewhere in the driver about fixing up the current
instances that have already snuck in (which in some sense is even worse
by accessing driver data of a grandchild device).

We really need to try sort this mess out and how to properly handle the
interactions between these layers (e.g. glue, dwc3 core and xhci). This
will likely involve adding callbacks from the child to the parent, for
example, when the child is suspending.


Hi Johan,

I agree with you, but in this case I believe there is no other way we can find the number of ports present. Unless its a dt property which parent driver can access the child's of node and get the details. Like done in v4 [1]. But it would be adding redundant data into DT as pointed out by Rob and Krzysztof and so we removed these properties.

Also, since this is a read only operation being done and no modifications are being done to driver data of child, is it still not acceptable as both dwc3-qcom and core are tightly coupled entities.

[1]: https://lore.kernel.org/all/20230115114146.12628-2-quic_kriskura@xxxxxxxxxxx/

Regards,
Krishna,



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux