Add crypto engine (CE) and CE BAM related nodes and definitions to
'sm6115.dtsi'.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Tested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Tested-by: Anders Roxell <anders.roxell@xxxxxxxxxx>
Tested-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6115.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 631ca327e064..27ff42cf6066 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
status = "disabled";
};
+ cryptobam: dma-controller@1b04000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0x0 0x01b04000 0x0 0x24000>;
+ interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <8>;
+ qcom,num-ees = <2>;
+ iommus = <&apps_smmu 0x94 0x11>,
+ <&apps_smmu 0x96 0x11>;
+ };
+
+ crypto: crypto@1b3a000 {
+ compatible = "qcom,sm6115-qce", "qcom,ipq4019-qce", "qcom,qce";
+ reg = <0x0 0x01b3a000 0x0 0x6000>;
+ clocks = <&rpmcc RPM_SMD_CE1_CLK>;
+ clock-names = "core";
+
+ dmas = <&cryptobam 6>, <&cryptobam 7>;
+ dma-names = "rx", "tx";
+ iommus = <&apps_smmu 0x94 0x11>,
+ <&apps_smmu 0x96 0x11>;
+ };
+
qfprom@1b40000 {
compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
reg = <0x0 0x01b40000 0x0 0x7000>;
--
2.38.1
