Re: [PATCH 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/19/23 2:21 PM, Komal Bajaj wrote:
Add required pins for SDHCI1, so that the interface can work reliably.

Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
  1 file changed, 50 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 6113def66a08..556942bfca5d 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -1160,6 +1160,56 @@
  				pins = "gpio31";
  				function = "gpio";
  			};
+
+			sdc1_on_state: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_off_state: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
  		};

  		apps_smmu: iommu@15000000 {
--
2.17.1

Reviewed-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>

Thanks.



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux