This patch series adds the relevant phy and controller configurations for enabling USB on IPQ9754 Depends on: https://lore.kernel.org/all/20230217142030.16012-1-quic_devipriy@xxxxxxxxxxx/ https://lore.kernel.org/lkml/20230407155727.20615-1-quic_devipriy@xxxxxxxxxxx/T/ [v11]: - Rename dwc_0 -> usb_0_dwc3 - Minor change in qcom,sc8280xp-qmp-usb3-uni-phy.yaml to factor in latest updates to the file [v10]: - Fix regulator definitions - Address couple of other comments [v9]: - Update bindings to make power-domains as optional since IPQ9574 doesn't have GDSCs [v8]: - Update bindings for the clock name change [v7]: - com_aux -> cfg_ahb in patch 7 [v6]: - Incorporated review comments - Resolve make dtbs_check messages - Fixed pcs_usb offset - Board dts file name changed [v5]: - Incorporated review comments - 'make dtbs_check' giving the following messages since ipq9574 doesn't have power domains. Hope this is ok /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml /local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml - Move qmp phy DT node to newer specification [v4]: - Incorporated review comments - Address all 'make dtbs_check' errors [v3]: - Incorporated review comments regarding coding style [v2]: - Incorporated review comments regarding coding style, maintaining sorted order of entries and unused phy register offsets - Removed NOC clock entries from DT node (will be implemented later with interconnect support) - Fixed 'make dtbs_check' errors/warnings [v1]: https://lore.kernel.org/linux-arm-msm/5dac3aa4-8dc7-f9eb-5cf3-b361efdc9494@xxxxxxxxxx/T/ Varadarajan Narayanan (9): dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY dt-bindings: usb: dwc3: Add IPQ9574 compatible clk: qcom: gcc-ipq9574: Add USB related clocks phy: qcom-qusb2: add QUSB2 support for IPQ9574 phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence arm64: dts: qcom: ipq9574: Add USB related nodes arm64: dts: qcom: ipq9574: Add LDO regulator node arm64: dts: qcom: ipq9574: Enable USB .../devicetree/bindings/phy/qcom,qusb2-phy.yaml | 3 +- .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml | 44 ++++++-- .../devicetree/bindings/usb/qcom,dwc3.yaml | 3 +- arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 30 ++++++ arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 +++++++++++++++++++ drivers/clk/qcom/gcc-ipq9574.c | 37 +++++++ drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 +++++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 + include/dt-bindings/clock/qcom,ipq9574-gcc.h | 2 + 9 files changed, 333 insertions(+), 8 deletions(-) -- 2.7.4
