After the internal discussions, it looks like this clock is managed by
RPM itself. Linux kernel should not touch it on its own, as this causes
disagreement with RPM. Shutting down this clock causes the OCMEM<->GPU
interface to stop working, resulting in GPU hangchecks/timeouts.
Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/clk/qcom/mmcc-msm8974.c | 19 -------------------
1 file changed, 19 deletions(-)
diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
index 277ef0065aae..82f6bad144a9 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -2204,23 +2204,6 @@ static struct clk_branch ocmemcx_ocmemnoc_clk = {
},
};
-static struct clk_branch oxili_ocmemgx_clk = {
- .halt_reg = 0x402c,
- .clkr = {
- .enable_reg = 0x402c,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "oxili_ocmemgx_clk",
- .parent_data = (const struct clk_parent_data[]){
- { .fw_name = "gfx3d_clk_src", .name = "gfx3d_clk_src" },
- },
- .num_parents = 1,
- .flags = CLK_SET_RATE_PARENT,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch ocmemnoc_clk = {
.halt_reg = 0x50b4,
.clkr = {
@@ -2512,7 +2495,6 @@ static struct clk_regmap *mmcc_msm8226_clocks[] = {
[MMSS_MMSSNOC_AXI_CLK] = &mmss_mmssnoc_axi_clk.clkr,
[MMSS_S0_AXI_CLK] = &mmss_s0_axi_clk.clkr,
[OCMEMCX_AHB_CLK] = &ocmemcx_ahb_clk.clkr,
- [OXILI_OCMEMGX_CLK] = &oxili_ocmemgx_clk.clkr,
[OXILI_GFX3D_CLK] = &oxili_gfx3d_clk.clkr,
[OXILICX_AHB_CLK] = &oxilicx_ahb_clk.clkr,
[OXILICX_AXI_CLK] = &oxilicx_axi_clk.clkr,
@@ -2670,7 +2652,6 @@ static struct clk_regmap *mmcc_msm8974_clocks[] = {
[MMSS_S0_AXI_CLK] = &mmss_s0_axi_clk.clkr,
[OCMEMCX_AHB_CLK] = &ocmemcx_ahb_clk.clkr,
[OCMEMCX_OCMEMNOC_CLK] = &ocmemcx_ocmemnoc_clk.clkr,
- [OXILI_OCMEMGX_CLK] = &oxili_ocmemgx_clk.clkr,
[OCMEMNOC_CLK] = &ocmemnoc_clk.clkr,
[OXILI_GFX3D_CLK] = &oxili_gfx3d_clk.clkr,
[OXILICX_AHB_CLK] = &oxilicx_ahb_clk.clkr,
--
2.39.2
