Re: [PATCH 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/7/2023 7:56 PM, Rob Herring wrote:
On Tue, Mar 07, 2023 at 10:11:27AM +0530, Manikanta Mylavarapu wrote:
Add new binding document for multipd model remoteproc.
IPQ5018, IPQ9574 follows multipd model.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
  .../bindings/remoteproc/qcom,multipd-pil.yaml | 282 ++++++++++++++++++
  1 file changed, 282 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
new file mode 100644
index 000000000000..b788607f5abd
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,multipd-pil.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,multipd-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Multipd Secure Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <andersson@xxxxxxxxxx>
+  - Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
+
+description:
+  Multipd Peripheral Image Loader loads firmware and boots Q6 pd, WCSS pd
+  remoteproc's on the Qualcomm IPQ5018, IPQ9574 SoC.

What is PD? I don't see it defined anywhere.

Pd means protection domain.
It's similar to process in Linux. Here QDSP6 processor runs each wifi radio functionality on a separate process. One process can't access other process resources, so this is termed as PD i.e protection domain.
Here we have two pd's called root and user pd. We can correlate Root pd
as root and user pd as user in linux. Root pd has more privileges than
user pd.
From remoteproc driver perspective, root pd corresponds to QDSP6 processor bring up and user pd corresponds to Wifi radio (WCSS) bring up.

I will try to add this info in cover page.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq5018-q6-mpd
+      - qcom,ipq9574-q6-mpd
+
+  '#address-cells': true

Need to define the size.

+
+  '#size-cells': true

ditto

It's not required. I am going to remove it.
+
+  'ranges': true

Don't need quotes

It's not required. I am going to remove it.
+
+  reg:
+    maxItems: 1
+
+  interrupts-extended:

Just 'interrupts'. Both forms are always supported.

Sure, will use 'interrupts'
+    items:
+      - description: Watchdog interrupt
+      - description: Fatal interrupt
+      - description: Ready interrupt
+      - description: Handover interrupt
+      - description: Stop acknowledge interrupt
+
+  interrupt-names:
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  clocks:
+    minItems: 25
+    maxItems: 25

You need to list out what the clocks are.

Sure. I will do.
+
+  clock-names:
+    minItems: 25
+    maxItems: 25
+
+  assigned-clocks:

You can drop this. Implicitly supported.

+    minItems: 13
+    maxItems: 13
+
+  assigned-clock-rates:
+    minItems: 13
+    maxItems: 13
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array

I believe this already has a type. It should be defined in a common
schema if not already and then included in this schema.

+    description: States used by the AP to signal the remoteprocessor
+    items:
+      - description: Shutdown Q6
+      - description: Stop Q6
+
+  qcom,smem-state-names:
+    description:
+      Names of the states used by the AP to signal the remoteprocessor
+    items:
+      - const: shutdown
+      - const: stop
+
+  memory-region:
+    items:
+      - description: Q6 pd reserved region
+
+  glink-edge:
+    $ref: /schemas/remoteproc/qcom,glink-edge.yaml#
+    description:
+      Qualcomm G-Link subnode which represents communication edge, channels
+      and devices related to the Modem.
+
+patternProperties:
+  "^remoteproc_pd1|remoteproc_pd2|remoteproc_pd3":
+    type: object
+    description:
+      In Multipd model, WCSS pd depends on Q6 pd i.e Q6 pd should be up before
+      WCSS. It can be achieved by keeping wcss pd node as subnode of Q6
+      device node.
+
+    properties:
+      compatible:
+        enum:
+          - "qcom,ipq5018-wcss-ahb-mpd"

Don't need quotes.

I will remove it.
+          - "qcom,ipq9574-wcss-ahb-mpd"
+          - "qcom,ipq5018-wcss-pcie-mpd"
+
+      interrupts-extended:

Just interrupts

I will use 'interrupts'
+        items:
+          - description: Fatal interrupt
+          - description: Ready interrupt
+          - description: Spawn acknowledge interrupt
+          - description: Stop acknowledge interrupt
+
+      interrupt-names:
+        items:
+          - const: fatal
+          - const: ready
+          - const: spawn-ack
+          - const: stop-ack
+
+      qcom,smem-states:
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+        description: States used by the AP to signal the remoteprocessor
+        items:
+          - description: Shutdown WCSS pd
+          - description: Stop WCSS pd
+          - description: Spawn WCSS pd
+
+      qcom,smem-state-names:
+        description:
+          Names of the states used by the AP to signal the remoteprocessor
+        items:
+          - const: shutdown
+          - const: stop
+          - const: spawn
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts-extended
+  - interrupt-names
+  - qcom,smem-states
+  - qcom,smem-state-names
+  - memory-region
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,ipq9574-q6-mpd
+    then:
+      properties:
+        assigned-clocks:

Don't need to define assigned-clocks

+          items:
+            - description: Phandle, clock specifier of GCC_ANOC_WCSS_AXI_M_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_AHB_S_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_ECAHB_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_ACMT_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_AXI_M_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AXIM_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AXIM2_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AHB_CLK
+            - description: Phandle, clock specifier of GCC_Q6_AHB_S_CLK
+            - description: Phandle, clock specifier of GCC_Q6SS_BOOT_CLK
+            - description: Phandle, clock specifier of GCC_MEM_NOC_Q6_AXI_CLK
+            - description: Phandle, clock specifier of GCC_WCSS_Q6_TBU_CLK
+            - description: Phandle, clock specifier of GCC_SYS_NOC_WCSS_AHB_CLK
+        assigned-clock-rates:
+          items:
+            - description: Must be 266666667 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 266666667 HZ
+            - description: Must be 533000000 HZ
+            - description: Must be 342857143 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 133333333 HZ
+            - description: Must be 342857143 HZ
+            - description: Must be 533000000 HZ
+            - description: Must be 533000000 HZ
+            - description: Must be 133333333 HZ
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+        #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+
+        q6v5_wcss: remoteproc@cd00000 {
+                compatible = "qcom,ipq5018-q6-mpd";
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+                reg = <0x0cd00000 0x4040>;
+                interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
+                                <&wcss_smp2p_in 0 0>,
+                                <&wcss_smp2p_in 1 0>,
+                                <&wcss_smp2p_in 2 0>,
+                                <&wcss_smp2p_in 3 0>;
+                interrupt-names = "wdog",
+                                  "fatal",
+                                  "ready",
+                                  "handover",
+                                  "stop-ack";
+
+                qcom,smem-states = <&wcss_smp2p_out 0>,
+                                   <&wcss_smp2p_out 1>;
+                qcom,smem-state-names = "shutdown",
+                                        "stop";
+
+                memory-region = <&q6_region>;
+
+                glink-edge {
+                        interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+                        label = "rtr";
+                        qcom,remote-pid = <1>;
+                        mboxes = <&apcs_glb 8>;
+                };
+
+                q6_wcss_pd1: remoteproc_pd1 {
+                        compatible = "qcom,ipq5018-wcss-ahb-mpd";
+                        interrupts-extended = <&wcss_smp2p_in 8 0>,
+                                        <&wcss_smp2p_in 9 0>,
+                                        <&wcss_smp2p_in 12 0>,
+                                        <&wcss_smp2p_in 11 0>;
+                        interrupt-names = "fatal",
+                                          "ready",
+                                          "spawn-ack",
+                                          "stop-ack";
+                        qcom,smem-states = <&wcss_smp2p_out 8>,
+                                           <&wcss_smp2p_out 9>,
+                                           <&wcss_smp2p_out 10>;
+                        qcom,smem-state-names = "shutdown",
+                                                "stop",
+                                                "spawn";
+                };
+
+                q6_wcss_pd2: remoteproc_pd2 {
+                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
+                        interrupts-extended = <&wcss_smp2p_in 16 0>,
+                                        <&wcss_smp2p_in 17 0>,
+                                        <&wcss_smp2p_in 20 0>,
+                                        <&wcss_smp2p_in 19 0>;
+                        interrupt-names = "fatal",
+                                          "ready",
+                                          "spawn-ack",
+                                          "stop-ack";
+
+                        qcom,smem-states = <&wcss_smp2p_out 16>,
+                                           <&wcss_smp2p_out 17>,
+                                           <&wcss_smp2p_out 18>;
+                        qcom,smem-state-names = "shutdown",
+                                                "stop",
+                                                "spawn";
+                        status = "okay";

Don't need status in examples.

I will remove status property.

Thanks & Regards,
Manikanta.
+                };
+
+                q6_wcss_pd3: remoteproc_pd3 {
+                        compatible = "qcom,ipq5018-wcss-pcie-mpd";
+                        interrupts-extended = <&wcss_smp2p_in 24 0>,
+                                        <&wcss_smp2p_in 25 0>,
+                                        <&wcss_smp2p_in 28 0>,
+                                        <&wcss_smp2p_in 27 0>;
+                        interrupt-names = "fatal",
+                                          "ready",
+                                          "spawn-ack",
+                                          "stop-ack";
+
+                        qcom,smem-states = <&wcss_smp2p_out 24>,
+                                           <&wcss_smp2p_out 25>,
+                                           <&wcss_smp2p_out 26>;
+                        qcom,smem-state-names = "shutdown",
+                                                "stop",
+                                                "spawn";
+                        status = "okay";
+                };
+        };
--
2.34.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux