This patchset adds support for the regulators found on Qualcomm's SPMI PMICs. The first patch is the "basic" driver that doesn't have any non-standard features. The next 4 patches add ways to configure some of the non-standard features that are generic but aren't supported in the regulator framework. And the final patch adds support for the non-standard features and some vendor specific features to the SPMI regulator driver. Changes since v1: * Split driver into standard and non-standard patches to ease review * New patches to regulator framework for non-standard features * Added bypass support * Namespaced macros * Switch to set_load() ops instead of get_optimum_mode() * Consolidated range finding code * Used delay op to calculate how long to delay after setting voltage on FTSMPS Stephen Boyd (6): regulator: Add QCOM SPMI regulator driver regulator: Add system_load constraint regulator: Add pull down support regulator: Add soft start support regulator: Add input current limit support regulator: qcom-spmi: Add vendor specific configuration .../bindings/regulator/qcom,spmi-regulator.txt | 183 +++ .../devicetree/bindings/regulator/regulator.txt | 5 + drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/core.c | 27 + drivers/regulator/of_regulator.c | 12 + drivers/regulator/qcom_spmi-regulator.c | 1678 ++++++++++++++++++++ include/linux/regulator/driver.h | 10 + include/linux/regulator/machine.h | 8 + 9 files changed, 1935 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt create mode 100644 drivers/regulator/qcom_spmi-regulator.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
