Re: [PATCH 3/6] thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On 07/05/2023 23:12, Matti Lehtimäki wrote:
> The MSM8226 TSENS IP has 6 thermal sensors in a TSENS v0.1 block.
> The thermal sensors use non-standard slope values.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

Note, the driver from 3.10 also provides custom data for non-calibrated 
mode. We can either ignore that (in the hope that all devices leaving 
the factory are calibrated), or fix it in the manner close to 8x74.

> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@xxxxxxxxx>
> ---
>   drivers/thermal/qcom/tsens-v0_1.c | 27 ++++++++++++++++++++++++++-
>   drivers/thermal/qcom/tsens.c      |  3 +++
>   drivers/thermal/qcom/tsens.h      |  2 +-
>   3 files changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index e89c6f39a3ae..ad57ab94546b 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -243,6 +243,18 @@ static int calibrate_8974(struct tsens_priv *priv)
>   	return 0;
>   }
>   
> +static int __init init_8226(struct tsens_priv *priv)
> +{
> +	priv->sensor[0].slope = 2901;
> +	priv->sensor[1].slope = 2846;
> +	priv->sensor[2].slope = 3038;
> +	priv->sensor[3].slope = 2955;
> +	priv->sensor[4].slope = 2901;
> +	priv->sensor[5].slope = 2846;
> +
> +	return init_common(priv);
> +}
> +
>   static int __init init_8939(struct tsens_priv *priv) {
>   	priv->sensor[0].slope = 2911;
>   	priv->sensor[1].slope = 2789;
> @@ -258,7 +270,7 @@ static int __init init_8939(struct tsens_priv *priv) {
>   	return init_common(priv);
>   }
>   
> -/* v0.1: 8916, 8939, 8974, 9607 */
> +/* v0.1: 8226, 8916, 8939, 8974, 9607 */
>   
>   static struct tsens_features tsens_v0_1_feat = {
>   	.ver_major	= VER_0_1,
> @@ -313,6 +325,19 @@ static const struct tsens_ops ops_v0_1 = {
>   	.get_temp	= get_temp_common,
>   };
>   
> +static const struct tsens_ops ops_8226 = {
> +	.init		= init_8226,
> +	.calibrate	= tsens_calibrate_common,
> +	.get_temp	= get_temp_common,
> +};
> +
> +struct tsens_plat_data data_8226 = {
> +	.num_sensors	= 6,
> +	.ops		= &ops_8226,
> +	.feat		= &tsens_v0_1_feat,
> +	.fields	= tsens_v0_1_regfields,
> +};
> +
>   static const struct tsens_ops ops_8916 = {
>   	.init		= init_common,
>   	.calibrate	= calibrate_8916,
> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> index 8020ead2794e..eb33a8bf0488 100644
> --- a/drivers/thermal/qcom/tsens.c
> +++ b/drivers/thermal/qcom/tsens.c
> @@ -1095,6 +1095,9 @@ static const struct of_device_id tsens_table[] = {
>   	}, {
>   		.compatible = "qcom,mdm9607-tsens",
>   		.data = &data_9607,
> +	}, {
> +		.compatible = "qcom,msm8226-tsens",
> +		.data = &data_8226,
>   	}, {
>   		.compatible = "qcom,msm8916-tsens",
>   		.data = &data_8916,
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index dba9cd38f637..433eba370998 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -635,7 +635,7 @@ int get_temp_common(const struct tsens_sensor *s, int *temp);
>   extern struct tsens_plat_data data_8960;
>   
>   /* TSENS v0.1 targets */
> -extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
> +extern struct tsens_plat_data data_8226, data_8916, data_8939, data_8974, data_9607;
>   
>   /* TSENS v1 targets */
>   extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;

--
With best wishes
Dmitry