On 05/05/2023 08:40, Bhupesh Sharma wrote: > Add dt-bindings for EUD found on Qualcomm SM6115 / SM4250 SoC. > > On this SoC (and derivatives) the enable bit inside 'tcsr_check_reg' > needs to be set first to 'enable' the eud module. > > So, update the dt-bindings to accommodate the third register > property (TCSR Base) required by the driver on these SoCs. > > Also for these SoCs, introduce a new bool property > 'qcom,secure-mode-enable', which indicates that the mode manager > needs to be accessed only via the secure world. > > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx> > --- > .../devicetree/bindings/soc/qcom/qcom,eud.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml > index f2c5ec7e6437..3b92cdf4e306 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml > @@ -18,17 +18,33 @@ properties: > items: > - enum: > - qcom,sc7280-eud > + - qcom,sm6115-eud > - const: qcom,eud > > reg: > + minItems: 2 > items: > - description: EUD Base Register Region > - description: EUD Mode Manager Register > + - description: TCSR Base Register Region > + > + reg-names: > + minItems: 2 > + items: > + - const: eud-base > + - const: eud-mode-mgr > + - const: tcsr-base > > interrupts: > description: EUD interrupt > maxItems: 1 > > + qcom,secure-mode-enable: > + type: boolean > + description: > + Indicates that the mode manager needs to be accessed only via the secure > + world (through 'scm' calls). I understood tcsr-base aplies only to SM6115, so this should be further constrained in allOf:if:then:. Best regards, Krzysztof
