Re: [PATCH] arm64: dts: qcom: Add Fxtec Pro1X (QX1050) DTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/05/2023 22:33, Dang Huynh wrote:
> The F(x)tec Pro1X is a mobile phone released by FX Technologies Ltd
> in 2022.
> 
> The phone is exactly the same as the Pro1 released in 2019 with some
> changes:
> - MSM8998 -> SM6115
> - Camera button is no longer multistate
> - Only one 48MP back camera
> - A new keyboard layout picked by the community.
> 

Thank you for your patch. There is something to discuss/improve.

> + * Copyright (c) 2023, Dang Huynh <danct12@xxxxxxxxxx>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm6115.dtsi"
> +#include "pm6125.dtsi"
> +
> +/ {
> +	model = "F(x)tec Pro1 (QX1050)";
> +	compatible = "fxtec,pro1x", "qcom,sm6115";

Missing bindings (first patch in the series).

> +	chassis-type = "handset";
> +
> +	/* required for bootloader to select correct board */
> +	qcom,msm-id = <417 0x10000>, <444 0x10000>;
> +	qcom,board-id = <34 0>;
> +
> +	aliases {
> +	};

Drop empty node.

> +
> +	chosen {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		framebuffer0: framebuffer@5c000000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0 0x5c000000 0 (1080 * 2160 * 4)>;
> +			width = <1080>;
> +			height = <2160>;
> +			stride = <(1080 * 4)>;
> +			format = "a8r8g8b8";
> +			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vol_up_n>;
> +
> +		key-volume-up {
> +			label = "Volume Up";
> +			linux,code = <KEY_VOLUMEUP>;
> +			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			gpio-key,wakeup;
> +		};
> +	};
> +};
> +
> +&tlmm {

Override/label entries should be ordered by name. tlmm is after pm6125.

> +	gpio-reserved-ranges = <0 4>, <14 4>;
> +};
> +
> +&pm6125_gpios {
> +	vol_up_n: vol-up-n-state {
> +		pins = "gpio5";
> +		function = "normal";
> +		power-source = <0>;
> +		bias-pull-up;
> +		input-enable;
> +	};
> +};
> +
> +&dispcc {
> +	/* HACK: disable until a panel driver is ready to retain simplefb */
> +	status = "disabled";
> +};
> +
> +&pon_pwrkey {
> +	status = "okay";
> +};
> +
> +&pon_resin {
> +	linux,code = <KEY_VOLUMEDOWN>;
> +	status = "okay";
> +};
> +
> +&rpm_requests {
> +	pm6125-regulators {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).


Best regards,
Krzysztof




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux