Re: [PATCH] arm64: dts: qcom: enable dual ("bonded") DSI mode for DB845c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 4 May 2023 at 20:11, Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
>
>
> On 4.05.2023 18:04, Dmitry Baryshkov wrote:
> > Now as both lt9611 and drm/msm drivers were updated to handle the 4k
> > modes over DSI, enable "bonded" DSI mode on DB845c. This way the board
> > utilizes both DSI links and thus can support 4k on the HDMI output.
> >
> > Cc: Amit Pundir <amit.pundir@xxxxxxxxxx>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > ---
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
>
> Konrad
> >  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 36 ++++++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > index e14fe9bbb386..4dea2c04b22f 100644
> > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> > @@ -419,6 +419,9 @@ &dsi0 {
> >       status = "okay";
> P.S. wanna move status last by chance?

Not within this patch, it is not relevant to bonded DSI mode.

>
> Konrad
> >       vdda-supply = <&vreg_l26a_1p2>;
> >
> > +     qcom,dual-dsi-mode;
> > +     qcom,master-dsi;
> > +
> >       ports {
> >               port@1 {
> >                       endpoint {
> > @@ -434,6 +437,31 @@ &dsi0_phy {
> >       vdds-supply = <&vreg_l1a_0p875>;
> >  };
> >
> > +&dsi1 {
> > +     vdda-supply = <&vreg_l26a_1p2>;
> > +
> > +     qcom,dual-dsi-mode;
> > +
> > +     /* DSI1 is slave, so use DSI0 clocks */
> > +     assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
> > +
> > +     status = "okay";
> > +
> > +     ports {
> > +             port@1 {
> > +                     endpoint {
> > +                             remote-endpoint = <&lt9611_b>;
> > +                             data-lanes = <0 1 2 3>;
> > +                     };
> > +             };
> > +     };
> > +};
> > +
> > +&dsi1_phy {
> > +     vdds-supply = <&vreg_l1a_0p875>;
> > +     status = "okay";
> > +};
> > +
> >  &gcc {
> >       protected-clocks = <GCC_QSPI_CORE_CLK>,
> >                          <GCC_QSPI_CORE_CLK_SRC>,
> > @@ -493,6 +521,14 @@ lt9611_a: endpoint {
> >                               };
> >                       };
> >
> > +                     port@1 {
> > +                             reg = <1>;
> > +
> > +                             lt9611_b: endpoint {
> > +                                     remote-endpoint = <&dsi1_out>;
> > +                             };
> > +                     };
> > +
> >                       port@2 {
> >                               reg = <2>;
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux